[AT] Motostandard

Mattias Kessén davidbrown950 at gmail.com
Wed Sep 29 01:52:03 PDT 2021


i can tell you all that someone paid almost 900 USD for it in non running
condition.

Med vänlig hälsning

Mattias Kessén

Hässelstad Solhöjden 2
594 93 Gamleby

070-523 59 00


Den tis 28 sep. 2021 kl 06:59 skrev <k7jdj at aol.com>:

> Nice video!!! Thanks for posting.
>
> Gary
>
> Renton, WA
>
>
> -----Original Message-----
> From: Mattias Kessén <davidbrown950 at gmail.com>
> To: Antique Tractor Email Discussion Group <at at lists.antique-tractor.com>
> Sent: Fri, Sep 24, 2021 12:15 am
> Subject: Re: [AT] Motostandard
>
> Moosepower it must be. An old engine like that one will be rated in Hp, kW
> wouldn't have been understood.
>
> According to this guys face it seems fun to drive.
> https://www.youtube.com/watch?v=YBYJqYxOv_g
>
> Med vänlig hälsning
>
> Mattias Kessén
>
> Hässelstad Solhöjden 2
> 594 93 Gamleby
>
> 070-523 59 00
>
>
> Den fre 24 sep. 2021 kl 01:19 skrev Phil Auten <pga2 at basicisp.net>:
>
> Yeah, as long as it isn't a BIG moose, unless it is a downhill pull all
> the way. 😁
> Phil in TX
> On 9/23/2021 10:47 AM, Spencer Yost wrote:
>
> Being used as a moose puller, I think MP is more appropriate.  MP stands
> for Moose (it can) Pull.  Clearly this thing could only be 1MP.
>
> Spencer
>
> Sent from my iPhone
>
> On Sep 23, 2021, at 5:52 AM, Stephen Offiler <soffiler at gmail.com>
> <soffiler at gmail.com> wrote:
>
> 
> I continue to assume either KW or PS, but not HP.  (Granted PS and HP are
> pretty darn close).  I'm at least mildly interested to know what units were
> customary when/where this machine was built.
>
> Using SAE values:  if this engine of 24 cu in displacement was capable of
> 1 ft-lb torque per cu in (a good rule of thumb for modern engines) at
> 3000rpm it would be making 13.7 HP.  I'd bet torque is not up to modern
> standards and peaks well below 3000rpm, so 8.9PS (=8.8HP) seems the best
> guess; whereas 8.9KW is over 11HP.
>
> SO
>
>
> On Wed, Sep 22, 2021 at 9:33 PM Carl Szabelski <c.s.szabelski at gmail.com>
> wrote:
>
> Puissance means several things and can be used in several ways. One
> meaning is the height that a horse can jump. Several meanings are for
> “POWER” of various types, including mechanical. So I would assume that the
> 8.9 means 8.9 horsepower.
>
> Carl
>
> On Wednesday, September 22, 2021, Tom Martin <tmartin at xtra.co.nz> wrote:
>
> You missed my point, but never mind...
> Tom
>
> On 23 September 2021 at 06:49 Stephen Offiler <soffiler at gmail.com> wrote:
>
> The language is French but the machine is Swiss.  I've never heard of "CV"
> but it turns out it's just another name for metric horsepower (PS).
>
> SO
>
> On Wed, Sep 22, 2021 at 2:36 PM Tom Martin < tmartin at xtra.co.nz> wrote:
>
> Surely, being French the units would be cv -*cheval-vapeur *
>
> *Tom *
>
> On 23 September 2021 at 01:08 Stephen Offiler < soffiler at gmail.com>
> wrote:
>
> I wondered the same thing, Phil.  "Puissance" is Power and the dataplate
> gives 8.9 with no units.  Now IF the correct units are KW, that converts to
> 11.9HP.  Another guess at units would be PS ("PferdStarke") aka "metric
> horsepower" amd 8.9PS converts to 8.8HP.
>
> I think "regime" means "governor" at 3000rpm sounds right.
>
> "Alesage" is bore, so maybe "course" is stroke.  The numbers in mm give
> displacement of 391cc which appears to match the stated "Cylindree" of 400;
> I guess this is a single-cylinder engine.
>
> SO
>
>
> On Wed, Sep 22, 2021 at 8:22 AM Phil Auten < pga2 at basicisp.net> wrote:
>
> Interesting little machine. I cannot tell how much horsepower the
> dataplate tells us. Maybe 2?
> Phil in TX
> On 9/22/2021 2:08 AM, Mattias Kessén wrote:
>
> Hi,
> I've never seen one of these before so I thought I'd better share it.
>
> https://www.blinto.se/auction/Motostandard-134612-36985
>
> Med vänlig hälsning
>
> Mattias Kessén
>
> Hässelstad Solhöjden 2
> 594 93 Gamleby
>
> 070-523 59 00
>
> _______________________________________________
> AT mailing listAT at lists.antique-tractor.comhttp://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>
> _______________________________________________
> AT mailing list
> AT at lists.antique-tractor.com
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>
> _______________________________________________
> AT mailing list
> AT at lists.antique-tractor.com
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>
> _______________________________________________
> AT mailing list
> AT at lists.antique-tractor.com
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>
> _______________________________________________
> AT mailing list
> AT at lists.antique-tractor.com
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>
> _______________________________________________
> AT mailing list
> AT at lists.antique-tractor.com
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>
> _______________________________________________
> AT mailing list
> AT at lists.antique-tractor.com
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>
>
> _______________________________________________
> AT mailing listAT at lists.antique-tractor.comhttp://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>
> _______________________________________________
> AT mailing list
> AT at lists.antique-tractor.com
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>
> _______________________________________________
> AT mailing list
> AT at lists.antique-tractor.com
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
> _______________________________________________
> AT mailing list
> AT at lists.antique-tractor.com
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.antique-tractor.com/pipermail/at-antique-tractor.com/attachments/20210929/cd30a885/attachment.htm>


More information about the AT mailing list