[AT] MF 35 D lift

[Dennis Johnson]

John,

With the lift cover off, the main control lever moves between the down and midway position, but locks up when trying to go to the “up” position.
Not sure what you mean by “small roller”. If it is the roller on the pump arm, the lift levers were in front of it.
Without some diagram I do NPT know how it is supposed to work.

Thanks
Dennis


Sent from my iPad

On Sep 15, 2021, at 3:36 PM, John Maddock <agtronixjv at bigpond.com> wrote:


Hello Dennis

Do you mean that the lever seems to be locked and does not move to the "up" position? Have you re-inserted the small roller after lowering the lift cover into position?

JV




------ Original Message ------
From: "Dennis Johnson" <moscowengnr at outlook.com>
To: "at at lists.antique-tractor.com" <at at lists.antique-tractor.com>
Sent: Friday, 10 Sep, 2021 At 12:19 PM
Subject: [AT] MF 35 D lift

I am confused about how the hydraulic lift linkage is supposed to work on my MF35D tractor. The lift lever does not move to the “up” position. I have not yet found how the linkage is supposed to work - drawing or video. I have seen some similar  u-tube videos on TO30/TO20, and MF multi-power, but not on the 35D.
FYI - installed new pump recently.
See attached picture of the linkage

Thanks
Dennis


Sent from my iPad



Sent from my iPad

________________________________
_______________________________________________

AT mailing list

AT at lists.antique-tractor.com

http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com

_______________________________________________
AT mailing list
AT at lists.antique-tractor.com
http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.antique-tractor.com/pipermail/at-antique-tractor.com/attachments/20210915/03c464ab/attachment.htm>