[AT] Deere versus IHC wheel rims

[Jim Becker]

You can’t find another H to measure that is any closer than 60 miles?

From: Cecil Bearden 
Sent: Sunday, November 28, 2021 8:39 AM
To: at at lists.antique-tractor.com 
Subject: Re: [AT] Deere versus IHC wheel rims

My situation is the H is 60 miles away and has been sitting for a while ( ? years ) The Deere rim and tire is here.   I need to take a tire & rim to mount on the H to load it...

Cecil



On 11/27/2021 8:04 PM, Jim Becker wrote:

  This shouldn’t be hard to figure out.  As far as I know, all 38” rims on Hs were a standard deep well rim.  I suppose John Deere used the same.  I would think any rim that looks about right is right.  Anything that won’t fit is obviously a non-starter.  If it looks about right, check the inside diameter and the width of the portion that gets clamped by the lugs.

  If your Deere rims are double bevel or whatever, they should immediately fail the “looks about right” test.

  Jim Becker

  From: deanvp 
  Sent: Saturday, November 27, 2021 6:12 PM
  To: Antique Tractor Email Discussion Group 
  Subject: Re: [AT] Deere versus IHC wheel rims

  Check with Miller Tire in Ohio.  They will be able to provide compatibility info.



  Sent from my Galaxy


  -------- Original message --------
  From: Carl Szabelski mailto:c.s.szabelski at gmail.com 
  Date: 11/27/21 1:52 PM (GMT-07:00) 
  To: Antique Tractor Email Discussion Group mailto:at at lists.antique-tractor.com 
  Subject: Re: [AT] Deere versus IHC wheel rims 

  Some JD and Farmall rims are interchangeable. Depends on the year and model. If you know what JD they came off of, you maybe able go to someplace like Steiner Tractor Parts and look them up. Then you can see if the descriptions indicates that they also fit a H. 

  Carl

  On Saturday, November 27, 2021, Cecil Bearden <crbearden at copper.net> wrote:

    I bought a H farmall on an auction just before the plandemic and while it was sitting over a year, the calcium leaked out and the rim is now shot.  I bought a couple of mounted 13-38 wheels and tires from an old John Deere collector a few miles away.  Would the John Deerre rim fit on the H farmall?  they are both 38 diameter, but I am not sure about the wedges or the double bevel or whatever they are called..

    Cecil











       
_______________________________________________
AT mailing list
AT at lists.antique-tractor.com
http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com

------------------------------------------------------------------------------
  _______________________________________________
  AT mailing list
  AT at lists.antique-tractor.com
  http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com


   
_______________________________________________
AT mailing list
AT at lists.antique-tractor.com
http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com


--------------------------------------------------------------------------------
_______________________________________________
AT mailing list
AT at lists.antique-tractor.com
http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.antique-tractor.com/pipermail/at-antique-tractor.com/attachments/20211128/81f5183f/attachment.htm>