[AT] Deere versus IHC wheel rims

[Carl Szabelski]

Cecil, I have to go and shovel snow this morning. While I’m out, I’ll try
to take some pictures and measurements of the rims on my H. Maybe it will
help.

Carl

On Sunday, November 28, 2021, Cecil Bearden <crbearden at copper.net> wrote:

> My situation is the H is 60 miles away and has been sitting for a while (
> ? years ) The Deere rim and tire is here.   I need to take a tire & rim to
> mount on the H to load it...
>
> Cecil
>
>
> On 11/27/2021 8:04 PM, Jim Becker wrote:
>
> This shouldn’t be hard to figure out.  As far as I know, all 38” rims on
> Hs were a standard deep well rim.  I suppose John Deere used the same.  I
> would think any rim that looks about right is right.  Anything that won’t
> fit is obviously a non-starter.  If it looks about right, check the inside
> diameter and the width of the portion that gets clamped by the lugs.
>
> If your Deere rims are double bevel or whatever, they should immediately
> fail the “looks about right” test.
>
> Jim Becker
>
> *From:* deanvp
> *Sent:* Saturday, November 27, 2021 6:12 PM
> *To:* Antique Tractor Email Discussion Group
> *Subject:* Re: [AT] Deere versus IHC wheel rims
>
> Check with Miller Tire in Ohio.  They will be able to provide
> compatibility info.
>
>
>
> Sent from my Galaxy
>
>
> -------- Original message --------
> From: Carl Szabelski <c.s.szabelski at gmail.com> <c.s.szabelski at gmail.com>
> Date: 11/27/21 1:52 PM (GMT-07:00)
> To: Antique Tractor Email Discussion Group <at at lists.antique-tractor.com>
> <at at lists.antique-tractor.com>
> Subject: Re: [AT] Deere versus IHC wheel rims
>
> Some JD and Farmall rims are interchangeable. Depends on the year and
> model. If you know what JD they came off of, you maybe able go to someplace
> like Steiner Tractor Parts and look them up. Then you can see if the
> descriptions indicates that they also fit a H.
>
> Carl
>
> On Saturday, November 27, 2021, Cecil Bearden <crbearden at copper.net>
> wrote:
>
>> I bought a H farmall on an auction just before the plandemic and while it
>> was sitting over a year, the calcium leaked out and the rim is now shot.  I
>> bought a couple of mounted 13-38 wheels and tires from an old John Deere
>> collector a few miles away.  Would the John Deerre rim fit on the H
>> farmall?  they are both 38 diameter, but I am not sure about the wedges or
>> the double bevel or whatever they are called..
>>
>> Cecil
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> AT mailing listAT at lists.antique-tractor.comhttp://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>>
>> ------------------------------
> _______________________________________________
> AT mailing list
> AT at lists.antique-tractor.com
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>
> _______________________________________________
> AT mailing listAT at lists.antique-tractor.comhttp://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.antique-tractor.com/pipermail/at-antique-tractor.com/attachments/20211128/2f9c1383/attachment.htm>