[AT] Deere versus IHC wheel rims

[Cecil Bearden]

My situation is the H is 60 miles away and has been sitting for a while 
( ? years ) The Deere rim and tire is here.   I need to take a tire & 
rim to mount on the H to load it...

Cecil


On 11/27/2021 8:04 PM, Jim Becker wrote:
> This shouldn’t be hard to figure out.  As far as I know, all 38” rims 
> on Hs were a standard deep well rim.  I suppose John Deere used the 
> same.  I would think any rim that looks about right is right.  
> Anything that won’t fit is obviously a non-starter.  If it looks about 
> right, check the inside diameter and the width of the portion that 
> gets clamped by the lugs.
> If your Deere rims are double bevel or whatever, they should 
> immediately fail the “looks about right” test.
> Jim Becker
> *From:* deanvp
> *Sent:* Saturday, November 27, 2021 6:12 PM
> *To:* Antique Tractor Email Discussion Group
> *Subject:* Re: [AT] Deere versus IHC wheel rims
> Check with Miller Tire in Ohio.  They will be able to provide 
> compatibility info.
> Sent from my Galaxy
> -------- Original message --------
> From: Carl Szabelski <c.s.szabelski at gmail.com>
> Date: 11/27/21 1:52 PM (GMT-07:00)
> To: Antique Tractor Email Discussion Group <at at lists.antique-tractor.com>
> Subject: Re: [AT] Deere versus IHC wheel rims
> Some JD and Farmall rims are interchangeable. Depends on the year and 
> model. If you know what JD they came off of, you maybe able go to 
> someplace like Steiner Tractor Parts and look them up. Then you can 
> see if the descriptions indicates that they also fit a H.
> Carl
>
> On Saturday, November 27, 2021, Cecil Bearden <crbearden at copper.net> 
> wrote:
>
>     I bought a H farmall on an auction just before the plandemic and
>     while it was sitting over a year, the calcium leaked out and the
>     rim is now shot.  I bought a couple of mounted 13-38 wheels and
>     tires from an old John Deere collector a few miles away. Would the
>     John Deerre rim fit on the H farmall? they are both 38 diameter,
>     but I am not sure about the wedges or the double bevel or whatever
>     they are called..
>
>     Cecil
>
>>
>>
>>
>>
>>
>>
>>
>>
>>     _______________________________________________
>>     AT mailing list
>>     AT at lists.antique-tractor.com
>>     http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com  <http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com>
>
> ------------------------------------------------------------------------
> _______________________________________________
> AT mailing list
> AT at lists.antique-tractor.com
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>
> _______________________________________________
> AT mailing list
> AT at lists.antique-tractor.com
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.antique-tractor.com/pipermail/at-antique-tractor.com/attachments/20211128/04b3893a/attachment.htm>