[AT] Removing clips

[Stephen Offiler]

Thanks for the update, Spencer!  Glad to hear the picks worked as intended!

SO

On Sat, May 22, 2021 at 11:36 AM Spencer Yost <spencer at rdfarms.com> wrote:

> Finally had a chance to work on the clip today and the picks are
> definitely the way to go. Just a few minutes later and I had the clip out.
> Just some very light tabs with a hammer and I got the straight pick behind
> the clip enough to pry it away from the groove almost an 1/8”.  I then
> could get another pick in too that would push further out and lift at the
> same time.
>
>  The pick that I thought would be useful actually wasn’t .   The offset
> one was used to lift the clip up and away.   I thought the 90° one would
> work the best but it just was too hard to get it keep its’ shoulder
> anchored all the while holding another pick with another hand.
>
>
>
> _______________________________________________
> AT mailing list
> AT at lists.antique-tractor.com
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.antique-tractor.com/pipermail/at-antique-tractor.com/attachments/20210522/4cfaafc0/attachment.htm>