[AT] Hydraulic leak

[Dennis Johnson]

Mike,

I agree with John, only way is too clean, and then start it up while someone tries turning the wheels. Watch and see where oil comes out first.

Picture shows the hose to to be a Aeroquip 2 wire braid hose. There appears to be some spot about 1/8” from the end of the crimp that looks suspicious. Not sure if it is a cut in the cover, or if it is just some dirt stuck there. When hoses fail that is a common failure point. I would wipe that down first and examine that area closer.

Dennis


Sent from my iPad

On Feb 11, 2021, at 7:35 PM, John Hall <jtchall at nc.rr.com> wrote:

 Only way to find a leak is to wash it spotless first. Otherwise you are just guessing if it is running or spraying.

John Hall


On 2/11/2021 8:23 PM, Mike M wrote:
Sorry if this came through twice, but here's the problem I'm having.
Dealer says it appears to be a power steering hose. I know nothing about
hydraulics but would like to get opinions as to this is a hose failure,
or an o-ring failure. Any help would be appreciated.

Regards,
Mike M


--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus



_______________________________________________
AT mailing list
AT at lists.antique-tractor.com<mailto:AT at lists.antique-tractor.com>
http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com


_______________________________________________
AT mailing list
AT at lists.antique-tractor.com
http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.antique-tractor.com/pipermail/at-antique-tractor.com/attachments/20210212/54dfe674/attachment.htm>