[AT] Allis Chalmers ED40 injector pipes

[John Maddock]

Thanks for the link Spencer.

I understand time is not of the essence.

Further research indicates that the UK is probably the best place to look,
since only about 600 of tractors with the Standard engine entered the U.S.

All grist to the mill!

JV

> I post this as much for the US diesel owners as much as for John:
>
> Central Injection of Esterville Iowa is phenomenal.   I’ve used their
> products, services and visited their shop once before (in fact I bought an
> old atlas/craftsman lathe from the owner while I was there!).  They
> probably can build the lines.
>
> https://www.centralfuelinjectionservice.com/
>
> I have not found an old pump/lines/injectors I can stump them with.
> Unfortunately for John, having dealt with shipping/customs on auto parts
> from your part of world(piston rods for a turbo charged diesel trooper
> engine - which are WAY more common is OZ that the US) I doubt this is
> viable; cost-wise.   But probably worth an email or two and some research
> to find out.
>
> Of course shipping and customs has a lot to do with how fast you need it
> and the category used for the paperwork. Maybe slow shipping on
> agricultural parts is actually affordable? All I know is the reasonably
> fast shipping (~10 days) on the customs category of “auto parts” on my
> rods were more expensive than the rods themselves.
>
> Spencer
>
> Sent from my iPhone
>
>> On Jan 30, 2020, at 9:39 PM, John Maddock <agtronixjv at southcom.com.au>
>> wrote:
>>
>> Good thoughts Cecil.  I'll check with my friend; maybe he tried that
>> route
>> & was unsuccesfull, since there is only one injector repair shop here,
>> and
>> I discovered that they are a bit behind the times!
>>
>> Maybe a need to cast the net a little wider.
>>
>> JV
>>
>>> Our injector pump repair shop can repair and build lines.  Maybe there
>>> is one in OZ that can build some like you need.
>>> Cecil
>>>
>>>> On 1/30/2020 5:07 PM, Bo Hinch wrote:
>>>> For parts , call these people
>>>> https://www.yesterdaystractors.com/Allis-Chalmers-ED40-Tractor-Parts.html
>>>>
>>>> A  story on the tractor
>>>> https://www.yesterdaystractors.com/articles/artint155.htm
>>>>
>>>> On Thu, Jan 30, 2020 at 3:51 PM John Maddock
>>>> <agtronixjv at southcom.com.au <mailto:agtronixjv at southcom.com.au>>
>>>> wrote:
>>>>
>>>>
>>>>    Can anyone suggest where a new set of injector pipes might be
>>>>    obtained for
>>>>    said tractor? That tractor used the UK-built Standard 23C engine,
>>>>    with a
>>>>    modified head fitted with glow plugs. I have a friend who has
>>>>    modified his
>>>>    FE35 by the addition of glow plugs, but now the original pipes
>>>>    don't fit
>>>>    well, and leak.
>>>>
>>>>    TIA
>>>>
>>>>    JV
>>>>
>>>>
>>>>    _______________________________________________
>>>>    AT mailing list
>>>>    AT at lists.antique-tractor.com <mailto:AT at lists.antique-tractor.com>
>>>>    http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>>>>
>>>>
>>>> _______________________________________________
>>>> AT mailing list
>>>> AT at lists.antique-tractor.com
>>>> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>>> _______________________________________________
>>> AT mailing list
>>> AT at lists.antique-tractor.com
>>> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>>>
>>
>>
>> Be a good ancestor
>>
>> _______________________________________________
>> AT mailing list
>> AT at lists.antique-tractor.com
>> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>>
> _______________________________________________
> AT mailing list
> AT at lists.antique-tractor.com
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>


Be a good ancestor