[AT] Allis Chalmers ED40 injector pipes

[James Peck]

With a thread gauge you could determine the size and pitch of all the ports. With an on-line catalog (Parker is one suggestion) you could identify all the fittings you need. Parker catalogs usually have info on making up tube assemblies. You would also need to order tubing and a tube bender. I bet you can bend up the set of tubes yourself. The tubing is the only thing that is difficult to ship. You could maybe pick that up at a local fluid power distributor. If you gave your list of parts to a local fluid power distributor they could probably cross it over to the similar items in the brands they carry.



Does the Standard 23C use a fuel piping thread that is currently available?



John (JV) Maddock  Down Under AT List member  (agtronixjv at southcom.com.au<mailto:agtronixjv at southcom.com.au>); Can anyone suggest where a new set of  injector pipes might be obtained for said tractor? That tractor used  the UK-built Standard 23C engine, with a modified head fitted with  glow plugs. I have a friend who has modified his FE35 by the addition  of glow plugs, but now the original pipes don't fit well, and leak.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.antique-tractor.com/pipermail/at-antique-tractor.com/attachments/20200209/83ecd868/attachment.htm>