[Farmall] obsolete parts

[Ivan]

On 9/8/2017 11:34 PM, John Hall wrote:
> When I searched, this is all I got, looks like you have to register.
>
> https://avspare.com/catalog/case/62604/40091/374480/
>
>
> Does CaseIH have a disposal branch for obsolete parts or can you request
> your dealer do a dealer search for that item?
>
> Have you considered having one made at a machine shop?
>
> John Hall
>
>
>
> On 9/8/2017 9:35 PM, Ivan wrote:
>>      I am looking for a spline shaft coupler for a IH 4125 skid loader
>> 1979 -1981 vintage . Dealers say its obsolete /NLA .  Part # 77400C1
>> Any ideas on where to find a new or used one ? Tried ebay, wengers,parts
>> depot,c&g,messicks,burgs .   Thanks, Ivan
>>
>> _______________________________________________
>> Farmall mailing list
>> http://www.antique-tractor.com/mailman/listinfo/farmall
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
>
  John , I tried the Depot which i have been told is their obsolete 
parts , as did one of the dealers also . I tried the local shops 
yesterday and the one offered me the use of the shop if I thought I 
could do it ,but he is basically not set up for it . His advice was two 
hours away that maybe might .  Online I found one place for $ 1000 setup 
min  could do it . One complete machine 600 miles away for sale that 
doesnt even run for 2000 plus transport . All for a $ 24 coupler .  I'm 
leaning towards making new shafts for the wheel reduction boxes and 
going to a standard off the shelf couplers and shaft .The most 
economical fix . Although if one could be found sitting in  a fence row 
or a salvage yard that would be the easiest . They only made that 
machine for three years and it was geared toward farmers for cleaning 
stalls  . Its compact size 40 " width , 8 ft long ,2000 pound  weight 
and only 500 lift  so it didnt sell very well .           Ivan