[AT] rear rim repair

[Richard Fink Sr]

John i have done that repair. Used a section of another rim cut back to 
good metal and welded in section. Rim does not need to be same size just 
tube hole.

R Fink Sr

PA


On 10/18/2016 8:15 PM, John Hall wrote:
>    What success have you guys had in welding up/in patches where the
> valve stem goes on rear tractor tires. The hole for the stem is about
> 3x's what it should be. I also have some cracks. FWIW this is a rear
> tire on a 4020 Deere, full of fluid, and we do heavy pulling with the
> tractor--I'm guessing that is what caused the leak to develop today. All
> I know is its sweating enough to actually run water out of the valve
> stem area.
>
> John Hall
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
>


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus