[AT] Carb problems

[Ken Knierim]

You can usually find manuals for the B&S engines (even some old ones) at
http://www.briggsandstratton.com/
by taking the numbers off the tag and looking it up. Not sure about parts
availability but this is where I'd start...

Hope this helps.

Ken in AZ

On Sun, Dec 25, 2011 at 11:04 AM, Ralph Goff <alfg at sasktel.net> wrote:

>
> ----- Original Message -----
> From: "Dick Day" <ddss at telebeep.com>
> To: "ATIS" <at at lists.antique-tractor.com>
> Sent: Saturday, December 24, 2011 7:24 PM
> Subject: [AT] Carb problems
>
>
> > A while back, I posted a question about David Bradley tractors. Well, I
> > bought two, one is the very first model they sold through Sears, a 5751
> > and
> > the other is a 1955 Super 3.
> >
> > The Super 3 was re-powered with a Briggs Model 14, 5hp engine.
> >
>
>
> Farm auctions are , or used to be, a good source for old Briggs engines.
> Probably half the grain augers out there used to be powered by a Briggs 12
> or 16 hp engine. Smaller ones too. I think I still have a black one, (9or
> 10
> hp?) Can't recall the model numbers. Carb kits were not a problem to buy
> last time I tried but that is a few years ago. A lot of these engines have
> been retired as grain augers grow bigger and require newer, bigger engines
> for power.
>
> Ralph in Sask.
>
>
> --------------------------------------------------------------------------------
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.454 / Virus Database: 271.1.1/4099 - Release Date: 12/23/11
> 19:34:00
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>