[Farmall] Looking for Super A contacts/parts sources/advice, etc

[John Gustafson]

Dale;
It's been said here before, head to Binder Books for the literature. I 
flipped over and looked. They have the service manuals, Parts lists, ptetty 
much anything you would need for research.  Jensales might also have them 
but I have found that the reproduction quality is better with Binder.
Thats the place to start.

----- Original Message ----- 
From: "Dale" <flya737 at aol.com>
To: <farmall at lists.antique-tractor.com>
Sent: Tuesday, September 21, 2010 1:54 PM
Subject: [Farmall] Looking for Super A contacts/parts sources/advice, etc


> Hi, all!  Since I finished my '55 Cub rebuild ("Bertha"), I was looking 
> for either another Cub or Super A to keep me out of trouble for a while! 
> Realized I actually had fun doing the restoration, enjoy seeing her look 
> so good, and still let her do the mowing on our 10 acres (followed by a 
> good bath, of course!).
>
> I found a Super A (waiting to get the serial # to find the year) 
> yesterday, and bought it.  Now I am looking for a good source for all the 
> things I will need to clean him up, make a few repairs and get advice.  I 
> got spoiled with all the Cub resources, including manuals online.  Is 
> there a similar source for the SA Service and Parts Manuals online? 
> Anyone here an expert on the SA?
>
> He, "Bubba", is being delivered tomorrow (9/22), so I don't know much 
> about him, but he has a 3-point conversion, cultivators on the back, and 
> will have a belly mower under him.  I only saw a few items I think I will 
> need in the way of parts:  Pedal guard, steering wheel, possibly seat 
> (molded cushion torn), air cleaner cap and breather cap (both are a bit 
> squashed), and am looking for a bush mower for the 3-point hitch, if 
> anyone knows of where I can get that (cheap).
>
> This winter I plan on tearing him down for a check and cosmetic work: 
> straighten grill dings, replace a few seals, etc, then repaint and new 
> decals.  I know I will be looking for someone to answer questions as I get 
> into it.  I am in Chapel Hill, NC, so if there is anyone in this area, let 
> me know.  I'll also need some manuals, either online for free, or if they 
> are not available, then to purchase.
>
> Thanks for any help.
>
> Dale Finch
> 919-969-6543
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall