[Farmall] Clutch Decision

[szabelsk at gdls.com]

Ben,

In similar cases I've just taken everything apart, did some light sanding 
with some 220 grit on both surfaces, reassembled and everything worked 
fine. You can do the sanding, drive the tractor a short time, and see if 
you have any problems. If it works, you're done. If it doesn't, your only 
real loss would be the effort of tearing everything apart a second time to 
put in the hardware, and of course the cost of the hardware itself.

Carl Szabelski



This is an e-mail from General Dynamics Land Systems. It is for the intended recipient only and may contain confidential and privileged information.  No one else may read, print, store, copy, forward or act in reliance on it or its attachments.  If you are not the intended recipient, please return this message to the sender and delete the message and any attachments from your computer. Your cooperation is appreciated.