[Farmall] International A shifting lever problems

[Barney Van De Weert]

I would punch out the pin (3/8 or 5/16") that hold the shift lever in the cover 
and see how worn it is, this will also let you lift the shift handle out of the 
cover. There is also a larger pin that this one slids through you would want to 
check as well. The small pin will probably be worn quite a bit and you can 
improve things by replacing it. Tighting the shift lever then building up the 
bottom of the shift lever will help as well.
 Barney Van De Weert
3828 Heartwood St
Uniontown OH 44685 


bbvande at yahoo.com
Cell# 330-760-5988 




________________________________
From: "ebony51 at frontiernet.net" <ebony51 at frontiernet.net>
To: Farmall/IHC mailing list <farmall at lists.antique-tractor.com>
Sent: Fri, July 9, 2010 8:50:11 PM
Subject: [Farmall] International A shifting lever problems

I am getting all too good at taking the transmission cover off on my 1946 
International A and unjamming the gears.  I assume the shifting lever is worn, 
making it easy to jam the gears.  Anybody know the dimensions is should be 
before I weld it up to a larger size?  Or is there a reason to think my problem 
is something else.

Thanks

Larry Hardesty
_______________________________________________
Farmall mailing list
http://www.antique-tractor.com/mailman/listinfo/farmall
_______________________________________________
Farmall mailing list
http://www.antique-tractor.com/mailman/listinfo/farmall