[AT] Stuck clutch JD 60

[Ken Knierim]

Might also want to take the crank out or disconnect the rods. Don't want
that kind of force trying to go through the crankshaft if the other cylinder
has some sort of an issue.


On Wed, Jul 7, 2010 at 9:01 AM, charlie hill <charliehill at embarqmail.com>wrote:

> True the valves would have to be shut.  If it's not at top dead center
> you'd
> have to disable the valve train and let the valves close.
>
> Charlie
>
> --------------------------------------------------
> From: "Mark Greer" <markagreer at embarqmail.com>
> Sent: Wednesday, July 07, 2010 10:55 AM
> To: "Antique tractor email discussion group" <at at lists.antique-tractor.com
> >
> Subject: Re: [AT] Stuck clutch JD 60
>
> > Good idea. As long as a valve isn't stuck open that should work great.
> > Mark
> >
> > ----- Original Message -----
> > From: "charlie hill" <charliehill at embarqmail.com>
> > To: "Antique tractor email discussion group"
> > <at at lists.antique-tractor.com>
> > Sent: Wednesday, July 07, 2010 6:09 AM
> > Subject: Re: [AT] Stuck clutch JD 60
> >
> >
> >> Dean I'm thinking Joe said that cyl had some water in it.
> >>
> >> I've heard of adapting an old spark plug base with a grease fitting so
> >> you
> >> can pump a cyl full of grease.  The pressure of the grease gun applies
> >> gentle pressure to the piston once the cylinder is full of grease.  I
> >> haven't tried that trick yet.
> >>
> >> Charlie
> >
> > _______________________________________________
> > AT mailing list
> > http://www.antique-tractor.com/mailman/listinfo/at
> >
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>