[Farmall] Governor Timing

[Ben Wagner]

Jim Becker wrote:
> Yes, it is timed.  When the crank is at #1 TDC, a single mark on the crank 
> gear will be towards the cam shaft.  The cam gear has a single mark that 
> should be aligned with the mark on the crankshaft.  In the same position, 
> the cam gear will have a double mark in line with the governor shaft.  The 
> governor gear has a double mark to align with the other double mark.  If 
> they are not aligned, you will not be able to set the magneto timing.
> Jim Becker
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
>   
Is there any way to do this without removing the cover on the front (and 
the front axle)?  I have not had to remove all that, and I really don't 
want to unless it is necessary... but I might just have to bite the 
bullet and do it. 

Any hints on how to remove the crankshaft pulley?

Thanks,
Ben Wagner