[Ford-ferguson] Ford-ferguson Digest, Vol 60, Issue 10

[ewatness at comcast.net]

I would VERY much like to have a copy of that. I have 2 belt pulleys with one working much better than the other.  I will likely rebuild the one but I have no idea where to find parts if they are available at all. I am still looking for a replacment metal pulley or drum or whatever it is called. The diagram willohelp me with that too I imagine;. Please mail a copy to me at Eric Watness, 1509 10th West, Seattle, WA 98110 my email is ewatness at comcast.net . I am happy to pay for copying costs as well. Thankyou! 




----- Original Message ----- 
From: cwi813 at mchsi.com 
To: ford-ferguson at lists.antique-tractor.com 
Sent: Thursday, May 21, 2009 3:45:41 PM GMT -08:00 US/Canada Pacific 
Subject: Re: [Ford-ferguson] Ford-ferguson Digest, Vol 60, Issue 10 

With regard to message 3 below: 

I have a reprint of the "Ford Tractor - Ferguson System - Service Manual for Owners and Mechanics," published by Harry Ferguson, Inc., Dearborn, MI in 1943. 

On pages 58 and 59 you'll find a nice verbal description as well as an exploded diagram to show how to move belt from left to right for the PTO to provide you different functions.  " Belt Pulley    The belt pulley can be attached quickly to the rear of the tractor after removing the power take-off shaft cap and check chain brackets. It is a self-contained drive with with a 9" diameter and a 6.5" width pulley. Its speed is 1358 R.P.M. The pulley gear ratio to power take-off shaft is 1.87 to 1. Rotation in either direction can be had by mounting the belt pulley to the left or to the right of the center of the tractor, or it can be mounted with the pulley toward the ground. The latter position is often used when driving an irrigation pump.   

The belt pulley contains its own reservoir of oil, and should be kept filled to the high level plug with the same lubricant that is used in the transmission and differential. 

Figure 155 shows the belt pulley parts. When it is necessary to overhaul the belt pulley, make sure the new gaskets are used; see that the bearings fit perfectly, and that the bolts and nuts are securely tightened." 

I tried to send the exploded diagram to you as an attachment, but the byte size of the scan is too large to send. I'd be happy to mail it to you if anyone wants it, just give me your name and street address.  It's a big, clear diagram and all parts are numbered according to the original part, so it's easy to see and read. 

Cynthia Wilhelmi 
West Des Moines, IA 
cwi813 at mchsi.com     
> 
> Message: 3 
> Date: Thu, 21 May 2009 08:10:18 -0400 
> From: " Jim Peck @Yahoo " 
> Subject: [Ford-ferguson] Type A power take off, side mounted belt 
> pulley 
> To: ford-ferguson at lists.antique-tractor.com 
> Message-ID: <004d01c9da0d$1cb5db40$562191c0$@com> 
> Content-Type: text/plain; 
> boundary="u5-WppEiWUODn92yuS8EGFo4d2eD8-SYImg5Imk"; 
> charset="US-ASCII" 
> 
> I got a tip about David Brown creating an optional PTO/Belt pulley for the 
> Ferguson-Brown Model A over the opposition of Harry. This link shows the right 
> side pulley. "Optional equipment included power take off, side mounted belt 
> pulley" 
> 
> http://www.tractordata.co.uk/david_brown/pages/ferguson_brown/index.htm 
> 
> Was the tractor sold as a Model A or Type A? 
> 
> I would love to have a picture of the PTO. 
> 
> http://groups.yahoo.com/group/MasseyFerguson/join MasseyFerguson and related 
> brands 
> http://groups.yahoo.com/group/ChallengerTractors/join Challenger brand of 
> agricultural equipment 
> http://groups.yahoo.com/group/TractorsEverywhere/join General tractor discussion 
> http://groups.yahoo.com/group/EquipmentMechanic/join Construction and 
> agriculture 
> 
> 
> _______________________________________ 
> No viruses found in this outgoing message 
> Scanned by iolo AntiVirus 1.5.6.4 
> http://www.iolo.com 
> 
> 
> 
> 
> ------------------------------ 
> 
> _______________________________________________ 
> Ford-ferguson mailing list 
> Ford-ferguson at lists.antique-tractor.com 
> http://www.antique-tractor.com/mailman/listinfo/ford-ferguson 
> 
> 
> End of Ford-ferguson Digest, Vol 60, Issue 10 
> ********************************************* 
_______________________________________________ 
Ford-ferguson mailing list 
http://www.antique-tractor.com/mailman/listinfo/ford-ferguson