[Farmall] H carburetor questions

[Jerry Kleehammer]

Thank you very much. Got her done with your help. Jerry




----- Original Message ----- 
From: "Jim Becker" <jim.becker at verizon.net>
To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
Sent: Sunday, May 04, 2008 9:54 PM
Subject: Re: [Farmall] H carburetor questions


> The only ball and spring combination I can think of for that carburetor
> serves as a detent for the choke lever.  It should fit in the side of the
> bowl next to the choke shaft.
>
> The Parts Catalog has a decent diagram of the carburetor.  If you don't 
> have
> that manual, go to the CaseIH site http://www.caseih.com/home.aspx?RL=ENNA
> and look in the on-line parts catalog.  You should get to a page with this
> diagram and the parts listing.
> https://webparts.pvassociates.net/cnh/db_image.php?ImageID=40151&DataSet=001CSIH&Link=3e003f38fe87769d85a825b166be7f20
>
> Jim Becker        jim.becker at verizon.net
>
> ----- Original Message ----- 
> From: "Jerry Kleehammer" <sheenajk at rochester.rr.com>
> To: <farmall at lists.antique-tractor.com>
> Sent: Sunday, May 04, 2008 7:43 PM
> Subject: [Farmall] H carburetor questions
>
>
>> Jim, I have a carb for an H on my bench. It was brought to me in pieces. 
>> I
>> have all the parts. There is a small ball and spring and i do not know
>> where it goes. I can not find a good picture of this old timer. It would
>> be a big help. Any ideal were i can get instructions or pictures. This
>> type of carb is new to me. Please reply, Thanks Jerry
>
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
>