[Farmall] auction finds

[John Hall]

Thanks Jim!
 I'll try to get a couple numbers off of the shelves and maybe you can see 
what they are. My guess is the numbers on the shelves would be rolls of 
chain. I think it used to come in 10 ft rolls. I remember cutting it to 
whatever length needed but can't remember if it was priced per foot or per 
link.

John
----- Original Message ----- 
From: "Jim Becker" <jim.becker at verizon.net>
To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
Sent: Wednesday, May 23, 2007 10:53 PM
Subject: Re: [Farmall] auction finds


>I get no hit on a couple of those numbers, but most come up superseded by
> another number that is described as "link", "link, connecting" or "link,
> chain".  Guessing they may have been roller chain links, I went into some
> Parts Catalogs and found:
> 1316D Roller Chain Link, 3/4" pitch
> 1317D Connecting Link, 3/4" pitch
> 1318D Offset Connecting Link, 3/4" pitch
>
> So I wouldn't be surprised if all those numbers turn out to be roller 
> chain
> links.
>
> Jim Becker        jim.becker at verizon.net
>
> ----- Original Message ----- 
> From: "John Hall" <jthall at worldnet.att.net>
> To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
> Sent: Wednesday, May 23, 2007 8:32 PM
> Subject: Re: [Farmall] auction finds
>
>
>> Try some of these numbers Jim----------
>> 1301,2,3,9,10,15,16,17,18D
>> 457112,3,4R91
>> and as promised even a seven digit# 4567007R91
>>
>> John
>>
>> ----- Original Message ----- 
>> From: "Jim Becker" <jim.becker at verizon.net>
>> To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
>> Sent: Sunday, May 20, 2007 11:12 AM
>> Subject: Re: [Farmall] auction finds
>>
>>
>>> What are some of the part numbers from the bins?
>>>
>>> Jim Becker        jim.becker at verizon.net
>>>
>>> ----- Original Message ----- 
>>> From: "John Hall" <jthall at worldnet.att.net>
>>> To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
>>> Sent: Sunday, May 20, 2007 6:17 AM
>>> Subject: [Farmall] auction finds
>>>
>>>>> Then on to buying the junk out of the shop. I bought a metal display
>>>>> stand
>>>> with about 10lbs of assorted bolts (all new) for $2.50. What is
>>>> inetersting
>>>> is the stand has about a dozen or so compartments all labeled with IH
>>>> part
>>>> numbers---most of which run in batches of sequential numbers. Also it
>>>> has
>>>> numbers running from C and D suffixes to 6 and even 1 seven digit R
>>>> suffix
>>>> part numbers----obviously whatever it contained spanned many years of
>>>> production. We can't quite figure out what this stand was for. Going to
>>>> try
>>>> a few of the numbers at a delership and see what if they are still good
>>>> and
>>>> if so what they are. Any guesses?
>>>>
>>>> John Hall
>
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
>