[Farmall] auction finds

Jim Becker jim.becker at verizon.net
Thu May 24 19:45:15 PDT 2007


In the 3/4" chain, I found 1338D is 10 links and 1340D is 50 links.  I don't 
get hits on either number now.  By the way, the stamped steel chain seems to 
have been listed by the 2 digit standard number, like 32, 45 etc.

Jim Becker        jim.becker at verizon.net

----- Original Message ----- 
From: "John Hall" <jthall at worldnet.att.net>
To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
Sent: Thursday, May 24, 2007 8:18 PM
Subject: Re: [Farmall] auction finds


> Thanks Jim!
> I'll try to get a couple numbers off of the shelves and maybe you can see
> what they are. My guess is the numbers on the shelves would be rolls of
> chain. I think it used to come in 10 ft rolls. I remember cutting it to
> whatever length needed but can't remember if it was priced per foot or per
> link.
>
> John
> ----- Original Message ----- 
> From: "Jim Becker" <jim.becker at verizon.net>
> To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
> Sent: Wednesday, May 23, 2007 10:53 PM
> Subject: Re: [Farmall] auction finds
>
>
>>I get no hit on a couple of those numbers, but most come up superseded by
>> another number that is described as "link", "link, connecting" or "link,
>> chain".  Guessing they may have been roller chain links, I went into some
>> Parts Catalogs and found:
>> 1316D Roller Chain Link, 3/4" pitch
>> 1317D Connecting Link, 3/4" pitch
>> 1318D Offset Connecting Link, 3/4" pitch
>>
>> So I wouldn't be surprised if all those numbers turn out to be roller
>> chain
>> links.
>>
>> Jim Becker        jim.becker at verizon.net
>>
>> ----- Original Message ----- 
>> From: "John Hall" <jthall at worldnet.att.net>
>> To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
>> Sent: Wednesday, May 23, 2007 8:32 PM
>> Subject: Re: [Farmall] auction finds
>>
>>
>>> Try some of these numbers Jim----------
>>> 1301,2,3,9,10,15,16,17,18D
>>> 457112,3,4R91
>>> and as promised even a seven digit# 4567007R91
>>>
>>> John
>>>
>>> ----- Original Message ----- 
>>> From: "Jim Becker" <jim.becker at verizon.net>
>>> To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
>>> Sent: Sunday, May 20, 2007 11:12 AM
>>> Subject: Re: [Farmall] auction finds
>>>
>>>
>>>> What are some of the part numbers from the bins?
>>>>
>>>> Jim Becker        jim.becker at verizon.net
>>>>
>>>> ----- Original Message ----- 
>>>> From: "John Hall" <jthall at worldnet.att.net>
>>>> To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
>>>> Sent: Sunday, May 20, 2007 6:17 AM
>>>> Subject: [Farmall] auction finds
>>>>
>>>>>> Then on to buying the junk out of the shop. I bought a metal display
>>>>>> stand
>>>>> with about 10lbs of assorted bolts (all new) for $2.50. What is
>>>>> inetersting
>>>>> is the stand has about a dozen or so compartments all labeled with IH
>>>>> part
>>>>> numbers---most of which run in batches of sequential numbers. Also it
>>>>> has
>>>>> numbers running from C and D suffixes to 6 and even 1 seven digit R
>>>>> suffix
>>>>> part numbers----obviously whatever it contained spanned many years of
>>>>> production. We can't quite figure out what this stand was for. Going 
>>>>> to
>>>>> try
>>>>> a few of the numbers at a delership and see what if they are still 
>>>>> good
>>>>> and
>>>>> if so what they are. Any guesses?
>>>>>
>>>>> John Hall




More information about the AT mailing list