[AJD] H Hydraulic pump

[D. Schuyler]

Jim,
It has been a long time since I had a H but it seems it was simple? I looked 
at the IT manual and it simply says
Remove Magneto, Disconnect oil line, drain oil and remove cap screws 
retaining assy to left side of governor case and remove assembly.
Re install in reverse order.
That is about all it has to say?
Dee
----- Original Message ----- 
From: "Jim Showers" <steamcar at frontiernet.net>
To: "Antique John Deere mailing list" 
<antique-johndeere at lists.antique-tractor.com>
Sent: Saturday, March 24, 2007 5:40 PM
Subject: [AJD] H Hydraulic pump


> Guys,
>    I need a little advice....I have to remove the hydraulic pump assembly 
> off an 1940 H that followed me home before Christmas.  It comes loose 
> about 3/8" and then hangs up.  The parts manual isn't very helpful and 
> Mother Deere doesn't offer a shop manual.  This has to come off so I can 
> get the transmission cover off to do some shift lever work.
> Thanks,
> Jim Showers
> _______________________________________________
> Antique-johndeere mailing list
> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>