[AT] Hole in exhaust manifold....

[Jerry Rhodes]

Well, thank you an good luck, the Devcon is a two part putty, mix it well, 
apply to the hole, if you can put the manifold in the oven 300 degs for 2 
hrs, turn the oven off an leave it over nite, you can file, grind, drill , 
thread etc..

Jerry NW Ohio
----- Original Message ----- 
From: "Howard Rawls" <howard at cconnect.net>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Sunday, January 28, 2007 8:18 PM
Subject: Re: [AT] Hole in exhaust manifold....


> Thanks to Jerry, John, H.L., Clint, Kevin, Mike, Crawler, Mark and Richard
> for the many responses to my inquiry. I think I will try either Devcon or
> Pyro Putty first with the knowledge that I will probably have to re-visit
> this problem later ;-) .
> This is a great list.....Thanks again for the help!
> Howard
>
> ----- Original Message -----
> From: Howard Rawls <howard at cconnect.net>
> To: Antique tractor email discussion group <at at lists.antique-tractor.com>
> Sent: Saturday, January 27, 2007 9:58 PM
> Subject: [AT] Hole in exhaust manifold....
>
>
>> Greetings to the list!
>>     Does anyone know of  a product that will seal up a finger-size hole 
>> in
> a
>> exhaust manifold ? Will JB Weld do it?
>> This manifold is on that Super A that I just finished fixing the steering
>> on.
>> Thanks in advance for any help!
>> Howard
>> http://www.antique-tractor.com/mailman/listinfo/at
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>