[AT] 1952 Case VAC-13 problem

[rdhaskell at juno.com]

Hi Ken.  I don't know anything about your Case.  But your post came in
with a date stamp of Wed, Feb 7 1990.  You may want to reset the date on
your computer.

Ron Haskell
rdhaskell at juno.com
Riverside, California
USA
http://albums.photo.epson.com/j/AlbumList?u=3009370&f=0

On Wed, 7 Feb 1990 22:50:57 -0600 "Ken and Mona Frost"
<knmfrost at gulftel.com> writes:
> I'm in the middle of restoring a 1952 Case VAC and have a hydraulic 
> line problem.  The pump intake line goes from the torque tube 
> reservoir to the pump intake at the front of the engine.  The line 
> is a 3/4" dia steel line with male tightening nuts that tightened on 
> brass compression rings.  One of the nuts is stripped.  The nuts 
> appear to each have a fine 3/4" tapered thread.  The nut (part # 
> VT-4911) is no longer available from CaseIH.  In my local area 
> (Baldwin Co., AL) I haven't found any vendors of any help.  Anyone 
> have any suggestions?
> Ken Frost
>