[AJD] Transmission for M John Deere

[John Boehm]

There should not be a lot of slack movement  in that
area. If you can jiggle the cluster gear around,
you've got too much play. I have all these parts
available in good used condition. If you contact me
off list, we can discuss it further.

John Boehm
Woodland, CA
Visit my web site at http://vintagetractors.com



--- hallpaul at bellsouth.net wrote:

> I am in the process of re-building and/or replacing
> the bearings in the transmission of my 1948 M John
> Deere.  All the teeth on the gears are in good shape
> but after replacing the roller bearings between the
> input shaft and 1 st gear I find there is a lot of
> slack or movement between these two.  Does anyone
> know how much movement or slack there should be
> between the input shaft and the 1 st cluster gear? 
> Any assistance or suggestions would be greatly
> appreciated.
> 
> Paul D. Hall
> 
> 
> _______________________________________________
> Antique-johndeere mailing list
>
http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>