[AT] Rivet how-to

[Larry D. Goss]

Yep.  I own one of those, John.  I put a message to you in a reply to
Farmer's email on this topic about how to get a conical shape.

Larry

-----Original Message-----
From: at-bounces at lists.antique-tractor.com
[mailto:at-bounces at lists.antique-tractor.com] On Behalf Of John Hall
Sent: Saturday, February 04, 2006 6:36 AM
To: Antique tractor email discussion group
Subject: Re: [AT] Rivet how-to

Thanks Larry. Ever used one of the store bought tools for brading sickle

rivets? They are U shaped with a screw to brad the rivet. I'm thinking
of 
something along that line. Trying to get the perfect cone is whats
throwing 
me. These rivets show no sign of a straight shoulder and come to a
point.

John

----- Original Message ----- 
From: "Larry D. Goss" <rlgoss at evansville.net>
To: "'Antique tractor email discussion group'" 
<at at lists.antique-tractor.com>
Sent: Friday, February 03, 2006 12:22 AM
Subject: RE: [AT] Rivet how-to


> There are some guys on this list who can answer your question a whole
> lot better than I can, John, but I'll start.
>
> My best guess is that a rivet of that diameter was hot when headed.  I
> tried to find the name for the pointed head but haven't come up with
it
> yet.  The round side is a button head.  The conical side would be a
pan
> head if it didn't come to a point.
>
> They could have been peened in place with a pneumatic gun and a dolly,
> but there also could have been spinning operation to do the conical
> heading.
>
> I'll dig out the shots I took of the Titan out in Colorado last summer
> and see if there's enough detail to get any clues.
>
> Larry
>
> -----Original Message-----
> From: at-bounces at lists.antique-tractor.com
> [mailto:at-bounces at lists.antique-tractor.com] On Behalf Of John Hall
> Sent: Thursday, February 02, 2006 8:43 PM
> To: Antique tractor email discussion group
> Subject: [AT] Rivet how-to
>
> OK, I need some help from those that have been there done that. I'm
> restoring a Titan 10-20 that is going to need several wheel spokes
> replaced.
> They are held in with about 1/2" rivets. The rivets have a round head
on
> one
> side and a point on the other. How is this type of rivet installed?
I'm
> guessing the rivets were heated? Were they braded pneumatically or was
> some
> sort of press used?
>
> John Hall
>
>
> 


_______________________________________________
AT mailing list
Remembering Our Friend Cecil Monson 11-4-2005
http://www.antique-tractor.com/mailman/listinfo/at