[Farmall] Farmall 'H' Wheel Bolts

[E. John Puckett]

Your local dealer may still be able to get them (par # 48986DA) (jam nut 
351833R1) , if not check with www.jptractorsalvage.com for them.  
another source would be McMaster-Karr ( www.mcmaster.com ).  and yes, 
grade 5 or 8 is very hard.  Homeowner quality  taps will not cut threads 
on them.

Jim Kordick wrote:

> To the group:
>
> What is the best source to obtain the 6 bolts that hold the rim to the 
> wheel
> on a 'H' Farmall?   These are the bolts that have the jamb nut, and 
> are threaded
> farther down the shaft then a normal bolt.
>
> I have all the clamps, but most of the bolts didn't survive the 
> disassembly phase of the
> restore project.
>
> There are a couple places in Des Moines that I am going to look 
> Monday, one of them
> is a grainger outlet, and another is a place called Iowa Fasteners.
>
> I talked to a welding shop, and he said he could just take the threads 
> farther down on
> a grade 5 or grade 8 bolt.  I assume it would need to be a pretty hard 
> bolt???
> Then he would order me the jamb nuts.
>
> Thanks for any input.
>
> Jim Kordick
> St. Charles, IA
> Farmall 'H'
> Farmall 450
> Ferguson TE-20
>
>
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
>
>

-- 
 John
another one of them
*.?-!.* cub owners