[AT] OT, MTD log splitter hydraulic cylinder repair?

[Howard Fleming]

Hi Ivan,

The end that is leaking has an o-ring or similar seal in it, but I do 
not know how to get it off (unscrew?), and if the parts are available 
(MTD only shows a replacement cylinder, not a rebuild kit for it).  

Pictures of the end of the cylinder are at:
http://www.moosebird.net/images/hyd-cylinder.jpg
http://www.moosebird.net/images/cyl-end.jpg

We had to weld a new pipe fitting on the end of the cylinder (long 
story), which is why it is leaking now (hoped that it would not, but 
worth trying it....:o).  

If I can not repair this cylinder, the Surplus Center is my first 
choice.  Just not sure if I can use a 2500 psi cylinder, or need a 3000 
psi cylinder for the machine.  No markings on the hyd pump to indicate 
the mfg or model of the it to get the ratings from.  

Thanks,
Howard


On 8 May 2005 at 10:23, ivan wrote:

> Howard , I'm not familiar with that particular machine . But ,  
> depending on how the cylinder is built ,most are repairable.  If the end
> where its leaking is welded , it is possible to weld them again . If its
> a bolt together type then parts can be matched up at your local hyd shop
> .
>  Or just buy a new cylinder from someone else .  My personal peference
>  is
> Surplus Center. 1 800 488 3407 and ask for tech support  , or just shop
> online . Ivan www.surpluscenter.com -----