[Steam-engine] Repro Castings

[James Mackessy]

Hi Rick!
     What materials do you cast, and what are your size and weight limits?
I have a project in mind, and I don't want to design anything that's a pita
for the foundry.
Best Regards;
Jim Mackessy
Syracuse, New York, USA
----- Original Message ----- 
From: "Tod Engine" <todengine at zoominternet.net>
To: "Steam-engine mailing list" <steam-engine at lists.stationary-engine.com>
Sent: Tuesday, February 15, 2005 6:52 PM
Subject: Re: [Steam-engine] Repro Castings


> Andy,
>
> Which foundry do you intend to use?  I have a small foundry here in
> Youngstown and our specialty is making castings from original pieces.  If
> you could send me a couple of pics I can let you know what preparations if
> any you would need to make.  Most of the time there are no special
> preparations needed.  I can make any follow boards or add stock to the
> original pieces as neccesary.
>
> The profits from the foundry operation, called Tod Engine Works goes
toward
> the preservation of the Tod Engine.
>
> Rick Rowlands
> Tod Engine Works
> 100 South Bridge Street Bldg. F
> Struthers, OH  44471
> 330-728-2799
> ----- Original Message ----- 
> From: "Andy glines" <pioneersop96 at yahoo.com>
> To: "Steam" <steam-engine at lists.stationary-engine.com>
> Sent: Tuesday, February 15, 2005 3:30 PM
> Subject: [Steam-engine] Repro Castings
>
>
> >I am gathering a few pieces that I need to have
> > reproduced in order to complete the restoration on the
> > huber.  For now, I intend to use original castings as
> > patterns.  How do I need to prepare these castings
> > before shipping them to the foundry?
> >
> > =====
> > Andy Glines
> > Evansville, IN
> >
> >
> >
> >
> > __________________________________
> > Do you Yahoo!?
> > Yahoo! Mail - You care about security. So do we.
> > http://promotions.yahoo.com/new_mail
> > _______________________________________________
> > Steam-engine mailing list
> > http://www.stationary-engine.com/mailman/listinfo/steam-engine
> >
>
> _______________________________________________
> Steam-engine mailing list
> http://www.stationary-engine.com/mailman/listinfo/steam-engine
>