[AJD] JD A Block and Head combinations

[Wiebelhaus]

Sorry, I don't have an answer for you. You might try Johnnypopper.com.
Brad

Chris C wrote:

>Ok,  Let's see if can get this out without being too
>confusing.
>
>   I have two JD A's I am tinkering with.   The one is
>sn 555752,  a Slant Dash A..  Given the size of the
>hole in the head,  I am assuming that the block is
>bad,  so I bought a block and head combination on Ebay
>here the past day or so.   The block is an A2324R, 
>and the head is an A4226R.  The parts book shows that
>these should not go together,  I questions the seller
>at great length over the phone and the swear that they
>came from the same tractor..  
>
>   The second A is S/N 607821.   Is shows that is
>should take an A3367R block and A4226R head.    This
>tractor has an external crack in the block,  and I can
>see water dripping back through the oil return
>passages in the bottom of the block in the crankcase, 
> so I assume that head is bad.   
>
>  So by the parts book,  I have a block for the early
>tractor and a head for the later one.   I will assume
>that since the A2324R block and A4226R Head fit on the
>sellers tractor they will go on the 46 A I have.  But,
> can I put them both on the 48?   That tractor runs
>now,  but adds water to the oil at an unacceptable
>rate,  the slant dash is much,  much further from
>running,  so I would like to get the 48 fixed up first
>if these parts will do it for me.  Either way,  I can
>use them.
>
>     Any help with this would be greatly appreciated.
>
>                   Chris
>
>__________________________________________________
>Do You Yahoo!?
>Tired of spam?  Yahoo! Mail has the best spam protection around 
>http://mail.yahoo.com 
>_______________________________________________
>Antique-johndeere mailing list
>http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>
>  
>