[AJD] JD 50 questions/Dean VP

[Paul O]

Gordon
Please tell me you have that crossover done before working on somethinng 
else????
Paul O

----- Original Message ----- 
From: "Gordon Hart" <grnacres at pgtc.net>
To: "'Antique John Deere mailing list'" 
<antique-johndeere at lists.antique-tractor.com>
Sent: Thursday, November 25, 2004 11:21 PM
Subject: [AJD] JD 50 questions/Dean VP


> Dean
> I have been working on the JD50 LP and nearing completion but need some
> questions answered.
> 1. Serial number 5026109 makes it a '55 and assume it should have a 800A
> hitch which it has most of except the lift cranks are P815A and P816A does
> this mean that it orginnally had an 800 hitch and some one converted it or
> were these cranks also used on 800A hitches. My PC397 is a little 
> confussing
> on this.
> 2. If a drawbar assembly was used were the brackets DA 5933A,DA 5934A or 
> was
> a regular three point type bolt/pin bolted direct to the drawbar.
> 3 No spacers are shown in the PC at the connection of the link to the 
> fork.
> Mine has 2 at each location making it more rigid.
> 4. I need to know how far above the grill the chrome" John Deere" is on 
> the
> nose cone. The bodyman covered the holes when he repaired the Nose
>
> Haven't been on the list much this summer and have been working 7 days a
> week for awhile not alot of time to play with tractors or computers.
>
> Gordon
>
> _______________________________________________
> Antique-johndeere mailing list
> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere