[Farmall] McCOrmick Deering #8 Plow Shares

Guy Fay fayguyma at execpc.com
Thu Aug 19 05:06:22 PDT 2004


I think you hit it right there, Jim- I was seeing a 0, thought it was 
part of the P&O. No metal tag. Thanks!
Guy
Jim Becker wrote:

>I'm not finding that number.  Plow bottoms had a lot of O part numbers.
>Part O3134 is a 16" right hand moldboard for the "HSKA" Hi-Speed bottom.  If
>that matches up, some of the shares that fit are:
>O556
>O664
>O582
>O622
>
>The first is probably the easiest to find, at least in your area.  If the
>O3134 thing doesn't match up, try to find other numbers on the bottom parts.
>Any chance there is still a long thin metal tag bolted to a bottom?
>
>Jim Becker        jim.becker at verizon.net
>
>----- Original Message ----- 
>From: "Guy Fay" <fayguyma at execpc.com>
>To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
>Sent: Wednesday, August 18, 2004 10:03 PM
>Subject: Re: [Farmall] McCOrmick Deering #8 Plow Shares
>
>
>  
>
>>The share looks like  aftermarket- couldn't quite make out the numbers
>>on the one remaonong (the other is completely gone). The numbers on the
>>bottoms look like PO 3134H. I'm pretty sure they're 16 inch. Tom
>>Underwood is supposed to be calling me tommorow night, but I'm tring to
>>figure out if I even got a good number- light was bad when I looked at
>>    
>>
>them.
>  
>
>>Jim Becker wrote:
>>
>>    
>>
>>>Depends on what bottoms are on it.  Front and rear are probably the same.
>>>Get the number off the rear share and I can probably cross it to a few
>>>      
>>>
>other
>  
>
>>>numbers that will also fit.
>>>
>>>Jim Becker        jim.becker at verizon.net
>>>
>>>----- Original Message ----- 
>>>From: "Guy Fay" <fayguyma at execpc.com>
>>>To: <farmall at lists.antique-tractor.com>
>>>Sent: Wednesday, August 11, 2004 7:57 PM
>>>Subject: [Farmall] McCOrmick Deering #8 Plow Shares
>>>
>>>
>>>
>>>
>>>      
>>>
>>>>Where can I get a new share for the 2-16 #8 I bought Monday? It's on
>>>>steel, looks pretty good except it's missing the front share. I'd need
>>>>the bolts as well.
>>>>Guy Fay
>>>>        
>>>>
>
>
>_______________________________________________
>Farmall mailing list
>http://www.antique-tractor.com/mailman/listinfo/farmall
>
>
>  
>




More information about the AT mailing list