[Farmall] McCOrmick Deering #8 Plow Shares

[Jim Becker]

I'm not finding that number.  Plow bottoms had a lot of O part numbers.
Part O3134 is a 16" right hand moldboard for the "HSKA" Hi-Speed bottom.  If
that matches up, some of the shares that fit are:
O556
O664
O582
O622

The first is probably the easiest to find, at least in your area.  If the
O3134 thing doesn't match up, try to find other numbers on the bottom parts.
Any chance there is still a long thin metal tag bolted to a bottom?

Jim Becker        jim.becker at verizon.net

----- Original Message ----- 
From: "Guy Fay" <fayguyma at execpc.com>
To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
Sent: Wednesday, August 18, 2004 10:03 PM
Subject: Re: [Farmall] McCOrmick Deering #8 Plow Shares


> The share looks like  aftermarket- couldn't quite make out the numbers
> on the one remaonong (the other is completely gone). The numbers on the
> bottoms look like PO 3134H. I'm pretty sure they're 16 inch. Tom
> Underwood is supposed to be calling me tommorow night, but I'm tring to
> figure out if I even got a good number- light was bad when I looked at
them.
>
> Jim Becker wrote:
>
> >Depends on what bottoms are on it.  Front and rear are probably the same.
> >Get the number off the rear share and I can probably cross it to a few
other
> >numbers that will also fit.
> >
> >Jim Becker        jim.becker at verizon.net
> >
> >----- Original Message ----- 
> >From: "Guy Fay" <fayguyma at execpc.com>
> >To: <farmall at lists.antique-tractor.com>
> >Sent: Wednesday, August 11, 2004 7:57 PM
> >Subject: [Farmall] McCOrmick Deering #8 Plow Shares
> >
> >
> >
> >
> >>Where can I get a new share for the 2-16 #8 I bought Monday? It's on
> >>steel, looks pretty good except it's missing the front share. I'd need
> >>the bolts as well.
> >>Guy Fay