[AT] Deere versus IHC wheel rims

[Carl Szabelski]

Cecil,

I’ll send them one at a time so that there shouldn’t be an issue with file
size. The pictures with the tape measure appear to be off a little.

Carl

On Sunday, November 28, 2021, Cecil Bearden <crbearden at copper.net> wrote:

> My situation is the H is 60 miles away and has been sitting for a while (
> ? years ) The Deere rim and tire is here.   I need to take a tire & rim to
> mount on the H to load it...
>
> Cecil
>
>
> On 11/27/2021 8:04 PM, Jim Becker wrote:
>
> This shouldn’t be hard to figure out.  As far as I know, all 38” rims on
> Hs were a standard deep well rim.  I suppose John Deere used the same.  I
> would think any rim that looks about right is right.  Anything that won’t
> fit is obviously a non-starter.  If it looks about right, check the inside
> diameter and the width of the portion that gets clamped by the lugs.
>
> If your Deere rims are double bevel or whatever, they should immediately
> fail the “looks about right” test.
>
> Jim Becker
>
> *From:* deanvp
> *Sent:* Saturday, November 27, 2021 6:12 PM
> *To:* Antique Tractor Email Discussion Group
> *Subject:* Re: [AT] Deere versus IHC wheel rims
>
> Check with Miller Tire in Ohio.  They will be able to provide
> compatibility info.
>
>
>
> Sent from my Galaxy
>
>
> -------- Original message --------
> From: Carl Szabelski <c.s.szabelski at gmail.com> <c.s.szabelski at gmail.com>
> Date: 11/27/21 1:52 PM (GMT-07:00)
> To: Antique Tractor Email Discussion Group <at at lists.antique-tractor.com>
> <at at lists.antique-tractor.com>
> Subject: Re: [AT] Deere versus IHC wheel rims
>
> Some JD and Farmall rims are interchangeable. Depends on the year and
> model. If you know what JD they came off of, you maybe able go to someplace
> like Steiner Tractor Parts and look them up. Then you can see if the
> descriptions indicates that they also fit a H.
>
> Carl
>
> On Saturday, November 27, 2021, Cecil Bearden <crbearden at copper.net>
> wrote:
>
>> I bought a H farmall on an auction just before the plandemic and while it
>> was sitting over a year, the calcium leaked out and the rim is now shot.  I
>> bought a couple of mounted 13-38 wheels and tires from an old John Deere
>> collector a few miles away.  Would the John Deerre rim fit on the H
>> farmall?  they are both 38 diameter, but I am not sure about the wedges or
>> the double bevel or whatever they are called..
>>
>> Cecil
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> AT mailing listAT at lists.antique-tractor.comhttp://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>>
>> ------------------------------
> _______________________________________________
> AT mailing list
> AT at lists.antique-tractor.com
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>
> _______________________________________________
> AT mailing listAT at lists.antique-tractor.comhttp://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.antique-tractor.com/pipermail/at-antique-tractor.com/attachments/20211128/470b4322/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: A8FC3CC4-2C17-42B8-BCB8-2EAFD4E1A298.jpeg
Type: image/jpeg
Size: 502951 bytes
Desc: not available
URL: <http://lists.antique-tractor.com/pipermail/at-antique-tractor.com/attachments/20211128/470b4322/attachment-0002.jpeg>