[AT] Allis B progress

[Milo Holroyd]

On 2/1/21 7:42 PM, Dennis Johnson wrote:
> Today I did more disassembly of the Allis B. Got engine out and put it 
> on an engine stand. Soaking pistons with penetrating oil. Using word 
> block and hammer to try and jar pistons. The good news it that 3 of 
> the 4 pistons sound a little different when hitting the wood with a 
> hammer. 1 of them is more of a dull thud. I am thinking the other 3 
> are closer to moving, and the one is stuck a lot tighter than the 
> others are.
> I need to get my puller up here so I can try to remove front crank 
> pulley. It is just stuck on there, without a bolt to hold it in place.
>
> Dennis
>
>
> Sent from my iPad
>
> _______________________________________________
> AT mailing list
> AT at lists.antique-tractor.com
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com

Nice work. I just pulled the press fit crankshaft pulley off the Farmall 
100 that I'm working on. I put a bearing separator behind the pulley and 
pulled on that with a 2 jaw puller (no room for 3).

No problems with damage to the pulley. I also discovered that the crank 
is tapped (1/2-13) so I pushed against a bolt head instead of the crank end.

Milo

( I also have a B that needs a new a manifold)

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.antique-tractor.com/pipermail/at-antique-tractor.com/attachments/20210201/9c17e089/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image0.jpeg
Type: image/jpeg
Size: 924420 bytes
Desc: not available
URL: <http://lists.antique-tractor.com/pipermail/at-antique-tractor.com/attachments/20210201/9c17e089/attachment-0002.jpeg>