[AT] 800 Ford tractor 3 point

[Dennis Johnson]

Dean,

Looking at some forums, I see there is a suction filter on the pump that has a tendency to plug. You might try cleaning that first.
One other thing is to see if there is a port you can open to bleed air or hydraulics when trying to raise the lift. Forums talked about pump loosing prime. If you could open to discharge, the pump might prime easier. Not sure where you could bleed it, but it might be worth a try.

Dennis


Sent from my iPad

On Dec 23, 2021, at 9:22 PM, deanvp at att.net wrote:


I would appreciate some help from you Ford tractor experts.  Have successfully sold the Ford Jubilee at a good price but not the boom pole that was attached to the 3 point. We need that for lift other stuff in the future. So we attached it to the 3 point on a Ford 800 only to find out the 3 point isn’t working at all. The dipstick shows being full of hydraulic oil. The next step is to try to bleed system at the pump up font.   Assuming we are successful at that and it still doesn’t work what would you recommend for further diagnostic checks?  The 3 Son’s have no knowledge of tractors at all and I have very limited knowledge regarding the N Series on up.  I’m trying to help since they are allowing me shop space free of charge.

Dean VP
Apache Junction, AZ


_______________________________________________
AT mailing list
AT at lists.antique-tractor.com
http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.antique-tractor.com/pipermail/at-antique-tractor.com/attachments/20211224/e4e1cf6e/attachment.htm>