[AT] Air compressor failure

Tue Dec 7 12:01:21 PST 2021

If anyone is in need compressor parts, I found these folks to be very
helpful:

https://mastertoolrepair.com/

I have a 5HP/80gallon Curtis here at work that is dedicated to my 5 CNC
lathes.  When I first put it in service, it had been sitting unused
for quite a while, and I found the unloader valve was trashed.  They helped
steer me to the correct replacement part, and it was here the next day.

SO

On Tue, Dec 7, 2021 at 12:36 PM deanvp <deanvp at att.net> wrote:

> How do you burnish points that close properly but maybe don't open at the
> right time?
>
>
>
> Sent from my Galaxy
>
>
> -------- Original message --------
> From: Spencer Yost <spencer at rdfarms.com>
> Date: 12/7/21 9:58 AM (GMT-07:00)
> To: Antique Tractor Email Discussion Group <at at lists.antique-tractor.com>
> Subject: Re: [AT] Air compressor failure
>
> I have the exact opposite problem (but probably same root cause)  with my
> water well pressure switch.  Every once in a blue moon it will fail to cut
> the pump on when the pressure drops below it’s rated psi. All I have to do
> is cut the power, run a little emery cloth over the points, and then all is
> well for another long while.
>
> PS:  Cut the power first!
>
> Spencer
>
> Sent from my iPhone
>
> > On Dec 7, 2021, at 9:39 AM, deanvp at att.net wrote:
> > The over pressure release valve does work when pulled manually  but is
> not releasing by itself up to 135 lbs pressure,   I don't yet know when it
> is supposed to automatically release.   I'm going to check a few things
> that you folks have asked about and see if any are contributing such as low
> compressor oil, plugged intake filter or a leaking outlet line and see what
> happens. Thanks for the suggestions.
> >
> >
> > Dean VP
> > Snohomish, WA 98290
> > "Socialism is a philosophy of failure, the creed of ignorance, and
> gospel of envy, its inherent virtue is the equal sharing of misery."
> > ..Winston Churchill...
> >
> > -----Original Message-----
> > From: AT <at-bounces at lists.antique-tractor.com> On Behalf Of Henry
> Miller
> > Sent: Tuesday, December 7, 2021 5:17 AM
> > To: at at lists.antique-tractor.com
> > Subject: Re: [AT] Air compressor failure
> >
> > Many large compressors like that pump up to 170psi.  Can you find a
> label someplace?
> >
> > Does the overpressure release valve release air when pulled, that is
> your backup in case the switch fails, if it works just let it run a little
> longer.
> >
> > --
> >  Henry Miller
> >  hank at millerfarm.com
> >
> > On Mon, Dec 6, 2021, at 22:57, deanvp at att.net wrote:
> >> Need some help relative to a Husky 60 gallon , 7 HP air compressor.  I
> >> am shop sitting the shop in AZ of my recently deceased friend until
> >> his three sons can decide what they are going to do with the 10
> >> tractors, 5 highly modified garden tractors and a fully stocked shop
> >> with a huge quantity of hand tools.  In return for doing the shop
> >> sitting I get to use the shop to do the work on my 1935 JD B and JD
> Garden Tractor.
> >> Upon the very first entry I noticed the air compressor was running too
> >> long. I shut the breaker off and am not trying to figure out of there
> >> is something I can do to fix it. My first thought is the pressure
> >> switch isn’t working right.   But….   I have never worked on this
> >> version. Attached is the picture of the air compressor. I have not yet
> >> found a operators manual or service manual to guide me through some
> >> trouble shooting.  I am pretty sure this was working at least up to
> >> the end of August and then my friend got confined to the house due to
> >> illness  and eventually died October 6.   I arrived in the middle of
> >> November to take first use of the shop again.  So the compressor sat
> >> unused for at least  couple months which may have something to do with
> >> it not working now.  It does pump up to 135 lbs pressure but does not
> >> shut off.  I set my compressor at home to shit off at 120 PSI.   So
> >> 135PSI seems high to me.   If I open the pressure switch is there some
> >> adjustments in there or is it maybe just stuck that needs to be
> >> unstuck?    Anyone with experience with this brand of air compressor?
> >> I don’t want to create more expense because I don’t know what I am
> >> doing.   Here is a picture. Note: The red dial on top of the pressure
> >> control does work in that it shuts down the compressor when moved to
> >> the Off position. When moved to the Auto position it just continues
> >> running.
> >>
> >>
> >>
> >> Dean VP
> >>
> >> Snohomish, WA 98290
> >>
> >> "Socialism is a philosophy of failure, the creed of ignorance, and
> >> gospel of envy, its inherent virtue is the equal sharing of misery."
> >>
> >> ..Winston Churchill...
> >>
> >>
> >> _______________________________________________
> >> AT mailing list
> >> AT at lists.antique-tractor.com
> >> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
> >>
> >> Attachments:
> >> * 20211206_152017a.jpg
> > _______________________________________________
> > AT mailing list
> > AT at lists.antique-tractor.com
> > http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
> >
> > _______________________________________________
> > AT mailing list
> > AT at lists.antique-tractor.com
> > http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
> _______________________________________________
> AT mailing list
> AT at lists.antique-tractor.com
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
> _______________________________________________
> AT mailing list
> AT at lists.antique-tractor.com
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.antique-tractor.com/pipermail/at-antique-tractor.com/attachments/20211207/448dc10d/attachment.htm>