[AT] Air filter lookup

[Jim Becker]

That one is 5-sided, sort of rectangular and closed on top.

A220C, that I mentioned earlier crosses to 42032.
https://www.wixfilters.com/Lookup/PartDetails.aspx?Part=103720

Jim Becker

From: Doug Tallman 
Sent: Friday, July 10, 2020 6:13 AM
To: Antique Tractor Email Discussion Group 
Subject: Re: [AT] Air filter lookup



There should be the direct link to looking up by size on the Wix site. Below it is the closest I see.  Doug T




https://www.wixfilters.com/Lookup/FilterBySize.aspx?catid=1&styleid=1


      49303   1.732 5.690 0.000 Closed 3.889 






On 7/9/2020 6:10 PM, Cecil Bearden wrote:

  The following web sites will fit 99% of all engines..  You can look up by size..

  https://www.wixfilters.com/Lookup/Applications.aspx?Section=8

  https://www.baldwinfilters.com/portal/site/Baldwin/menuitem.baf68f3e1f93c260baef35bf4256d1ca/?vgnextoid=527b6411b160a610VgnVCM10000025651dacRCRD&vgnextfmt=EN#/

  Cecil







  On 7/9/2020 4:08 PM, jdnut at aol.com wrote:

    Agreed with taking filter in to a couple of stores, and I might add reluctantly given some of the dialogue, a Deere dealership that handles riding mowers.  I was helping a neighbor with his Deere riding mower a week or so ago..... he bought a "kit" with air, oil, spark plug... etc., for his mower.... air filter was different.  He went to Deere dealership where he bought mower, and parts person said that there were four different air filters for that model of mower, .... with one being specific for California.  Anyway, to get back to the point..... the one on his Briggs Stratton engine was cylindrical... I might have guessed maybe 5 inches....??? in diameter, maybe 7 inches long, and fit on a pipe somewhere in the 1.25 to 1.5 range.  I suspect the inner diameter if your fits on a pipe is the key measurement if that is how yours attaches. 

    John Maxwell



    -----Original Message-----
    From: John Hall mailto:jtchall at nc.rr.com
    To: at at lists.antique-tractor.com
    Sent: Thu, Jul 9, 2020 1:35 pm
    Subject: Re: [AT] Air filter lookup


    Kohler had a lot of stuff around that size--especially in older Cub 
    Cadets and Deere lawn mowers. Got a tractor Supply near you? The ones 
    here have a great selection of genuine Kohler and Briggs parts.

    John Hall



    On 7/9/2020 4:07 PM, Henry Miller wrote:
    > O took the air filter out of one of my homemade tractors and said "I'll be this is the original from 1983". I think you can imagine how dirty it is. There are no numbers on it, and the NAPA guys can't find anything in their books. Of course everything is make year model there and they don't deal with much small engine stuff anyway. Does anyone have any tricks to find a filter than is 6 inches in diameter and 1.75 thick? I'm sure it was a common part at the local hardware store back when the tractor was made, but now I'm stuck trying to find a replacement with no idea where to look up filters by size.
    >

    _______________________________________________
    AT mailing list
    AT at lists.antique-tractor.com
    http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com


     
_______________________________________________
AT mailing list
AT at lists.antique-tractor.com
http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com

   
_______________________________________________
AT mailing list
AT at lists.antique-tractor.com
http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com


--------------------------------------------------------------------------------
_______________________________________________
AT mailing list
AT at lists.antique-tractor.com
http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.antique-tractor.com/pipermail/at-antique-tractor.com/attachments/20200710/347dfdcd/attachment.htm>