[AT] Allis Chalmers ED40 injector pipes

[Thomas Martin]

Just an after-thought, You said your friend had tweaked the pipes?
He needs to make sure that where the pipe screws to the injector, 
it is inline, not at an angle. Best way for tweaking is with the pipe 
secured inline to the injector. Could be the problem.

Tom


> On 09 February 2020 at 20:32 John Maddock <agtronixjv at southcom.com.au> wrote:
> 
> 
> Hello Tom
> 
> Greetings from Tassie.  I'll have some of the rain the south has been
> getting if you are down that way :-)
> 
> Thanks for your input; I appreciate your time & effort.
> 
> I put the problem to the list on behalf of a friend, assuming that the AC
> involved would have been built in the US. I understand now that it was an
> English machine, and only around 600 went to the US. That being so, I
> think we'll have a better chance of finding pipes there.
> 
> I've checked with the local injector shop, while picking up serviced
> injectors for my MF168.  The answer was around AUD100 per pipe.  I haven't
> relayed that to my friend coz I know that would be more than he could
> justify.
> 
> JV
> 
> > John
> > Just a heads up on the equipment to make injector pipes:
> > Most injection shops should have it.
> >
> > https://www.stardiesel.com/en/fuel-pipes-and-accessories/fuel-pipes-hydraulic-press.html
> >
> > Last century it was all Hartridge equipment...
> >
> > Tom
> >
> >> On 09 February 2020 at 15:07 John Maddock <agtronixjv at southcom.com.au>
> >> wrote:
> >>
> >>
> >> Thanks James.  I'll pass this info on to Guy.
> >>
> >> JV
> >>
> >>
> >> > With a thread gauge you could determine the size and pitch of all the
> >> > ports. With an on-line catalog (Parker is one suggestion) you could
> >> > identify all the fittings you need. Parker catalogs usually have info
> >> on
> >> > making up tube assemblies. You would also need to order tubing and a
> >> tube
> >> > bender. I bet you can bend up the set of tubes yourself. The tubing is
> >> the
> >> > only thing that is difficult to ship. You could maybe pick that up at
> >> a
> >> > local fluid power distributor. If you gave your list of parts to a
> >> local
> >> > fluid power distributor they could probably cross it over to the
> >> similar
> >> > items in the brands they carry.
> >> >
> >> >
> >> >
> >> > Does the Standard 23C use a fuel piping thread that is currently
> >> > available?
> >> >
> >> >
> >> >
> >> > John (JV) Maddock  Down Under AT List member
> >> > (agtronixjv at southcom.com.au<mailto:agtronixjv at southcom.com.au>); Can
> >> > anyone suggest where a new set of  injector pipes might be obtained
> >> for
> >> > said tractor? That tractor used  the UK-built Standard 23C engine,
> >> with a
> >> > modified head fitted with  glow plugs. I have a friend who has
> >> modified
> >> > his FE35 by the addition  of glow plugs, but now the original pipes
> >> don't
> >> > fit well, and leak.
> >> > _______________________________________________
> >> > AT mailing list
> >> > AT at lists.antique-tractor.com
> >> > http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
> >> >
> >>
> >>
> >> Be a good ancestor
> >>
> >> _______________________________________________
> >> AT mailing list
> >> AT at lists.antique-tractor.com
> >> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
> > _______________________________________________
> > AT mailing list
> > AT at lists.antique-tractor.com
> > http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
> >
> 
> 
> Be a good ancestor
> 
> _______________________________________________
> AT mailing list
> AT at lists.antique-tractor.com
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com