[AT] Allis Chalmers ED40 injector pipes

[Cecil Bearden]

IIRC the tube fittings on the injectors and the pump are threaded into 
the pump casting and the injectors to adapt them to the tubing.  If you 
could determine the thread in the pump and injectors, then a hydraulic 
fitting could be used for the lines. Just a thought
Cecil

On 2/8/2020 8:07 PM, John Maddock wrote:
> Thanks James.  I'll pass this info on to Guy.
>
> JV
>
>
>> With a thread gauge you could determine the size and pitch of all the
>> ports. With an on-line catalog (Parker is one suggestion) you could
>> identify all the fittings you need. Parker catalogs usually have info on
>> making up tube assemblies. You would also need to order tubing and a tube
>> bender. I bet you can bend up the set of tubes yourself. The tubing is the
>> only thing that is difficult to ship. You could maybe pick that up at a
>> local fluid power distributor. If you gave your list of parts to a local
>> fluid power distributor they could probably cross it over to the similar
>> items in the brands they carry.
>>
>>
>>
>> Does the Standard 23C use a fuel piping thread that is currently
>> available?
>>
>>
>>
>> John (JV) Maddock  Down Under AT List member
>> (agtronixjv at southcom.com.au<mailto:agtronixjv at southcom.com.au>); Can
>> anyone suggest where a new set of  injector pipes might be obtained for
>> said tractor? That tractor used  the UK-built Standard 23C engine, with a
>> modified head fitted with  glow plugs. I have a friend who has modified
>> his FE35 by the addition  of glow plugs, but now the original pipes don't
>> fit well, and leak.
>> _______________________________________________
>> AT mailing list
>> AT at lists.antique-tractor.com
>> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>>
>
> Be a good ancestor
>
> _______________________________________________
> AT mailing list
> AT at lists.antique-tractor.com
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com