[AT] JD PowrTrol Purge

[partzpicker]

Steve, I put your question out on a JD board.  I'll relay answers if there are any.Sent from my Sprint Samsung Galaxy Phone.
-------- Original message --------From: STEVE ALLEN <steveallen855 at centurytel.net> Date: 8/10/20  3:08 PM  (GMT-06:00) To: at at lists.antique-tractor.com Subject: [AT] JD PowrTrol Purge Gentlemen, a hydraulic question.We had to have new hydraulic hoses made for our 6' brushhog, and, when swapping them out, we discovered the oil in the PowrTrol on the '51 A had become contaminated with water.Can anyone suggest a practical and non-harmful way to purge the system of the contaminated oil?  We got a lot out when the old hoses came off, and I pushed as much as I could out of the cylinder, and I drained as much as I could out of the PowrTrol unit at the lower plug.  I am stymied on doing a complete purge, however.Thanks for any suggestions!The "original" Steve Allen_______________________________________________AT mailing listAT at lists.antique-tractor.comhttp://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.antique-tractor.com/pipermail/at-antique-tractor.com/attachments/20200810/27b768ff/attachment.htm>