<html><head><meta http-equiv="Content-Type" content="text/html; charset=UTF-8"></head><body dir="auto">
<div dir="auto">Steve, I put your question out on a JD board. I'll relay answers if there are any.</div><div dir="auto"><br></div><div dir="auto"><br></div><div dir="auto"><br></div><div id="composer_signature" dir="auto"><div style="font-size:85%;color:#575757" dir="auto">Sent from my Sprint Samsung Galaxy Phone.</div></div><div dir="auto"><br></div><div><br></div><div dir="auto" style="font-size:100%;color:#000000"><div>-------- Original message --------</div><div>From: STEVE ALLEN <steveallen855@centurytel.net> </div><div>Date: 8/10/20 3:08 PM (GMT-06:00) </div><div>To: at@lists.antique-tractor.com </div><div>Subject: [AT] JD PowrTrol Purge </div><div><br></div></div>Gentlemen, a hydraulic question.<br><br>We had to have new hydraulic hoses made for our 6' brushhog, and, when swapping them out, we discovered the oil in the PowrTrol on the '51 A had become contaminated with water.<br><br>Can anyone suggest a practical and non-harmful way to purge the system of the contaminated oil? We got a lot out when the old hoses came off, and I pushed as much as I could out of the cylinder, and I drained as much as I could out of the PowrTrol unit at the lower plug. I am stymied on doing a complete purge, however.<br><br>Thanks for any suggestions!<br><br>The "original" Steve Allen<br>_______________________________________________<br>AT mailing list<br>AT@lists.antique-tractor.com<br>http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com<br></body></html>