[AT] 2. Re: '51 JD A PROGRESS!!!! (deanvp at att.net) + PROGRESS on the '49 A wheels! (deanvp at att.net) (STEVE ALLEN) (STEVE ALLEN)

[Cecil Bearden]

I use methanol.  50/50  If you have a flat, break down one side ofthe 
tire, pull out the tube to the hole, clean it and patch, then 
reassemble.  Many times I don't even pump the fluid out..  I bought some 
stop leak that will mix with all fluids...
Cecil

t

On 4/23/2020 2:14 PM, szabelski at wildblue.net wrote:
> If available in your area, beet juice is good for filling tires. It doesn’t freeze solid in the winter. Only issue is that if you ever get a flat, it’s a sticky mess. An option is to get wheel weights, that way you can add/remove them as needed for different tasks.
>
> When I bought the Cub it had calcium chloride filled tires, the rims were eaten out in a couple of years. Purchased a set of rear wheel weights (150# each) that I can wrestle on and off between mowing grass and plowing.
>
> Carl
>
>
> ----- Original Message -----
> From: STEVE ALLEN <steveallen855 at centurytel.net>
> To: at at lists.antique-tractor.com
> Sent: Thu, 23 Apr 2020 14:44:24 -0400 (EDT)
> Subject: Re: [AT] 2. Re: '51 JD A PROGRESS!!!! (deanvp at att.net) + PROGRESS on the '49 A wheels! (deanvp at att.net) (STEVE ALLEN) (STEVE ALLEN)
>
> Good question, Joe, and I checked it out:  left the gas cap off, and it made no difference.
>
> Too much rain at the moment to get much done, and I am in the office the rest of the week, anyway.
>
> By the way, I *must* apologize for my goof in not deleting the mass of unnecessary quotations yesterday, thus cluttering up the digest and making it incomprehensible.  I usually grumble about that sort of thing, and so it is only just that I grumble about my own goof.  I shall assign myself due penance.
>
> I drive a couple hours to pick up a decent wheel from a salvage/parts house on Saturday.  I hope this means I can have the '49 A on its feet by the next weekend.  Most of the wheels I found were eaten up.  We've had discussions of fluid on ATIS before.  All I can say is that, if I ever have to use fluid, I will pay extra not to use something corrosive.  It is disheartening to watch the rims dissolve before your eyes.
>
> Dean Vinson:  I have used a pair of pliers to pull the slots on the cover open a bit, essentially enlarging the diameter, to help keep them in place.  I almost lost the cover a couple times in the field.  Given the number of tractors I see without covers, I suspect the problem is pretty common.
>
> The "original" Steve Allen
> _______________________________________________
> AT mailing list
> AT at lists.antique-tractor.com
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>
> _______________________________________________
> AT mailing list
> AT at lists.antique-tractor.com
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com