[AT] [External] Re: tire tools was brand

[Gunnells, Brad R]

Thanks for the picture. Clever idea on the cut metal cap to screw it in. That was the part I was trying to wrap my head around on how you got it twisted in and out securely. Would be easy to make from some old items lying around. Kind of reminds me of things in the Farm Show<https://www.farmshow.com/index.php> publication. I subscribed for a couple years. Lots of ingenuity like this that people come up with.

Brad

From: AT <at-bounces at lists.antique-tractor.com> on behalf of Stephen Offiler <soffiler at gmail.com>
Reply-To: Antique group <at at lists.antique-tractor.com>
Date: Thursday, April 11, 2019 at 6:51 AM
To: Antique group <at at lists.antique-tractor.com>
Subject: Re: [AT] [External] Re: tire tools was brand

Brad, and Jim:

Picture attached.  Mine attaches to the *inside* of the valve stem, core removed.  The Slime branded tool attaches to the *outside* and the problem with that is the fact that the hole in the rim has to be large enough for the tool to fit through.  On the other hand, mine works even  on rims where the hole is just barely larger than the valve stem (example, motorcycles).  Admittedly, if you are installing tubes into formerly tubeless setups, the hole in the rim is going to be larger, and the Slime tool works fine.  The first one I built was just like the Slime tool, using a metal cap and attaching to the outside of the valve stem, and it was fine on wheelbarrow and lawnmower wheels but I had to modify it when I first did a motorcycle tube.

SO


On Wed, Apr 10, 2019 at 4:00 PM Gunnells, Brad R <brad-gunnells at uiowa.edu<mailto:brad-gunnells at uiowa.edu>> wrote:
Thanks Jim for that link. Yeah for $5 I probably wouldn’t put together anything as easy to use either. Wish I’d have known about this when placing other orders from them…….

Brad

From: AT <at-bounces at lists.antique-tractor.com<mailto:at-bounces at lists.antique-tractor.com>> on behalf of Jim Becker <mr.jebecker at gmail.com<mailto:mr.jebecker at gmail.com>>
Reply-To: Antique group <at at lists.antique-tractor.com<mailto:at at lists.antique-tractor.com>>
Date: Wednesday, April 10, 2019 at 12:58 PM
To: Antique group <at at lists.antique-tractor.com<mailto:at at lists.antique-tractor.com>>
Subject: Re: [AT] [External] Re: tire tools was brand

For 5 bucks, it isn’t worth spending a lot of time making one.

https://www.etrailer.com/Tire-Inflation-and-Repair/Slime/SLM20075.html

From: Stephen Offiler
Sent: Wednesday, April 10, 2019 12:02 PM
To: Antique Tractor Email Discussion Group
Subject: Re: [AT] [External] Re: tire tools was brand

OK, will do Brad.  Jotted it on the calendar/task list, which is mandatory if I am going to actually do *anything* I say.

SO


On Wed, Apr 10, 2019 at 12:47 PM Gunnells, Brad R <brad-gunnells at uiowa.edu<mailto:brad-gunnells at uiowa.edu>> wrote:
If you ever get a chance you should take a picture of that. I’d like to see how you did it. I’ve got the bar type tool for pulling tubeless valve stems into a wheel or the thread repair/remover valve tool that I use to hold a tube from falling back in once inserted into the wheel. I can see where what you’ve made could be handy on those small little tires where not having the valve stem through the rim would make them easier to mount.

Thanks
Brad


From: AT <at-bounces at lists.antique-tractor.com<mailto:at-bounces at lists.antique-tractor.com>> on behalf of Stephen Offiler <soffiler at gmail.com<mailto:soffiler at gmail.com>>
Reply-To: Antique group <at at lists.antique-tractor.com<mailto:at at lists.antique-tractor.com>>
Date: Wednesday, April 10, 2019 at 10:52 AM
To: Antique group <at at lists.antique-tractor.com<mailto:at at lists.antique-tractor.com>>
Subject: [External] Re: [AT] tire tools was brand

Absolutely.  I built myself just such a tool and use it everywhere there's a tube being installed, including wheelbarrow and small trailer tires, motorcycle tires, etc.  Mine is based on an old valve core and a piece of bicycle brake cable.

SO


On Wed, Apr 10, 2019 at 11:31 AM James Peck <jamesgpeck at hotmail.com<mailto:jamesgpeck at hotmail.com>> wrote:
One key tool was the device to pull the tire tube valve through the hole.

https://www.youtube.com/watch?v=4TbPJvtfY6k

Here is a YouTube of mounting a tire on a rim.

https://www.youtube.com/watch?v=7rCvy6rbAog

[James Peck] What tire tools do you use and can you advise as to where you got them.

[Cecil Bearden] In my case, I mount my own tires and it takes me a day to mount 2 tires with fluid in them because of my disabilities.  However, If I had them mounted, it would be nearly $500, so I think I made a pretty good day's pay.  Due to the difficulty or expense of mounting tires, I will only buy new when replacing tires.   Do it once and forget it....   As I said before, stay away from SPEEDWAY tires...They do not fit.. I spent over $250 in tubes and lost over $200 in alcohol fluid due to these tires...
_______________________________________________
AT mailing list
AT at lists.antique-tractor.com<mailto:AT at lists.antique-tractor.com>
http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
_______________________________________________
AT mailing list
AT at lists.antique-tractor.com<mailto:AT at lists.antique-tractor.com>
http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
________________________________
_______________________________________________
AT mailing list
AT at lists.antique-tractor.com<mailto:AT at lists.antique-tractor.com>
http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
_______________________________________________
AT mailing list
AT at lists.antique-tractor.com<mailto:AT at lists.antique-tractor.com>
http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.antique-tractor.com/pipermail/at-antique-tractor.com/attachments/20190411/9b208d7d/attachment.htm>