[AT] Man, but the old ones are solid

Dean VP deanvp at att.net
Sat May 20 20:47:33 PDT 2017


Dean,

That 620 is really looking good. A real classic and a real good example of
why JD gained market share on I/H during this period. During the JD 20 and
30 series JD passed I/H in number of wheeled agricultural tractors
manufactured and sold. Later on after the New Generation tractors were
introduced JD became the number one producer of all agricultural equipment
passing IH and Ford. JD had been 3rd. It also makes me feel good that I
played a small part in encouraging you to buy this gem and that it has
really worked out well for you.  However, I do know the Super MTA is your
real favorite. I also appreciate that you have slowly removed some of the
cosmetic warts on the 620.  That shows real dedication to preserving the
original look. I'm not sure why your hood is showing fuel stains directly
below the filler cap. Is this possibly being caused by a bad seal on the
filler cap? You can get new gaskets for them or possibly a new red fuel cap
is in order. Eventually it will mess of the decals and it would be wise to
try to avoid that expense. Sometimes the filler tube is damaged causing the
leak. Then there is some major work to replace the filler tube. 

Dean VP
Snohomish, WA 98290

It's better to be judged by 12 than carried by 6. 

-----Original Message-----
From: at-bounces at lists.antique-tractor.com
[mailto:at-bounces at lists.antique-tractor.com] On Behalf Of Dean Vinson
Sent: Saturday, May 20, 2017 6:48 PM
To: 'Antique tractor email discussion group' <at at lists.antique-tractor.com>
Subject: [AT] Man, but the old ones are solid

Weather was on-and-off rainy today, so I took advantage of one of the rainy
spells to catch up on maintenance on the John Deere 620:   Replaced the
brake pad on the clutch pulley, adjusted the clutch, and changed the oil and
filter.   Been meaning to do each of those things for a while so it was good
to see them finished.   A while later the rain stopped and eventually the
sun came out, just a heck of a nice afternoon, so I figured I'd better
test-drive the 620 to make sure everything still worked okay.  ;)

Looked good (see attached photo), sounded good, felt good.   Heck of a solid
old machine.  I found myself grateful, again, for the fine work the
engineers and builders did back then. 

Dean Vinson
Saint Paris, Ohio




More information about the AT mailing list