[AT] more HP guaranteed!/now front end on the ground.

[Dennis Johnson]

Dean

Wish I would have seen that. I got to the show but was only able to stay about 3 hours, saw a few pulls, and then had to get on the road heading back to Houston.

Dennis

Sent from my iPad

> On Mar 23, 2017, at 12:09 PM, Dean VP <deanvp at att.net> wrote:
> 
> Just to put this thread into perspective.  It only took 14 HP to get my JD 200 Garden Tractor vertical in a Garden Tractor pull in Glendale, AZ AEDGETA show.
> 
> PS: The engine has been changed from 8HP to 14 HP.  😊
> 
> 
> Dean VP
> Apache junction, AZ
> 
> It's better to be judged by 12 than carried by 6. 
> 
> -----Original Message-----
> From: at-bounces at lists.antique-tractor.com [mailto:at-bounces at lists.antique-tractor.com] On Behalf Of charlie hill
> Sent: Thursday, March 23, 2017 9:00 AM
> To: Antique tractor email discussion group <at at lists.antique-tractor.com>
> Subject: Re: [AT] more HP guaranteed!/now front end on the ground.
> 
> Sounds like it was doing a good job for you!
> 
> Charlie
> 
> -----Original Message-----
> From: John Hall
> Sent: Monday, March 20, 2017 9:18 PM
> To: Antique tractor email discussion group
> Subject: Re: [AT] more HP guaranteed!/now front end on the ground.
> 
> Thats about right on the HP. I was running the 4430 in a field one year chiseling bean stubble right after Thanksgiving. As best as I can recall I was dropping close to 7 gallons an hour of diesel. My earlier comment about the only thing original was the frame--lots of wiggling of the shanks---wore/broke springs, u bolts, the cast iron caps on the ends of the springs, plate under the bottom, warped the pcs that the shank mounted in, broke a few shanks and even once I managed to shear 2 of the
> 3/4 (or are they 7/8) bolts that clamp the shank assembly to the frame.
> Definitely a fun piece of machinery to run, but when one was worn out, it got expensive quick. Still see tobacco farmers around here use them.
> 
> John Hall
> 
>> On 3/20/2017 1:57 PM, charlie hill wrote:
>> John the chisel plows the guys around here used to run (I haven't seen 
>> one in years) required 10 hp per tine plus 10 hp so an 11 tine needed 
>> 120 drawbar hp.
>> That was in
>> moderate to light soil.
>> 
>> Charlie
>> 
>> -----Original Message-----
>> From: John Hall
>> Sent: Sunday, March 19, 2017 7:59 AM
>> To: Antique tractor email discussion group
>> Subject: Re: [AT] more HP guaranteed!/now front end on the ground.
>> 
>> The only thing we ever had without gauge wheels was a 2 shank 
>> subsoiler--old school style, not the modern DMI setups.
>> I could handle chisel plowing better if I ran only 9 shanks instead of 
>> 11, just not enough tractor. The only thing I ever ran doing heavy 
>> tillage has been two 4020 Deeres and a 4430. They all worked pretty 
>> good plowing, but deep chiseling was a different story. We used to 
>> chisel all our double cropped soybeans and never had any trouble---but 
>> we didn't sink it to China either.
>> 
>> John Hall
>> 
>>> On 3/18/2017 4:59 PM, Greg Hass wrote:
>>> Personally, I have never been a fan of "draft systems" as they have 
>>> never worked for me. The only tractor that we ever used it on was a 
>>> Farmall 504 when plowing. Even then we had our hand on the lever at 
>>> all times and were constantly changing it to do a good job plowing. 
>>> We have all mixed ground; some parts heavy ground and some parts 
>>> sand. The way draft control works for me is on sand it plows normal 
>>> depth and of course in the hard pull the plow raises and might only 
>>> go four inches deep which is the opposite of what I want. I prefer to 
>>> plow  sand the same depth as clay or maybe even shallower. It does me 
>>> no good to have the heavy ground plowed shallow. I now have four 
>>> tractors with draft control but haven't used it on any of them in 
>>> years. For plowing I use a
>>> 3-18 inch roll-over plow. It has a very good depth wheel on the side 
>>> any I adjust that and the plow stays an even depth. I also have a 7 
>>> shank chisel plow which is 3 pt. hitch. I bought it used and the 
>>> previous owner had built depth wheels on each side; he did a very 
>>> professional job. Same as with the plow, I just put it down on the 
>>> wheels and go and the depth stays the same. One advantage I have over 
>>> the old days is I bought a front wheel assist tractor 40 hp bigger 
>>> than what I had but kept the same equipment so tough spots don't 
>>> really bother me. I'm not saying draft control is useless and no one 
>>> should use it; just telling my experience with it. If it works for you, more power to you.
>>>         Greg Hass
>>> _______________________________________________
>>> AT mailing list
>>> http://www.antique-tractor.com/mailman/listinfo/at
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>> 
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
> 
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at 
> 
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
> 
> 
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at