[AT] Fork lift parts

[Cecil Bearden]

I have some old IH rear ends on some old trucks.  It just started 
raining here and I have to work on a septic tank again in the morning, 
so I might be a bit getting to look for one.

Cecil in OKla


On 1/21/2017 5:36 PM, Mike M wrote:
> Ron, any chance the shaft could be welded?  I broke the steering shaft
> on my Massey 255, neighbor (in a welding shop setting) welded it back
> together. It snapped in an area that didn't ride in bearings or seals,
> so that was to my advantage.
>
> Mike M
>
>
> On 1/21/2017 4:37 PM, rdhaskell at juno.com wrote:
>> Hi all.
>> I broke the axle on my Hyster RT 150 fork lift.  To keep this on topic, I
>> use it when working on my old engines and tractors.  This was made in the
>> 50's and is powered by an IH Greendiamond 233 engine.  I was trying to
>> push the forks under a three cylinder Hicks marine engine setting on
>> dirt.  Dumped the clutch and bang, the drive shaft turned but I didn't
>> move.  The axle has:  9459 A34 58662 H and a circle with IH stamped also.
>>    It is 37" long, with 16 splines that are 2.580" long and 1.815" in
>> diameter.  The rest of the axle is 1.590" in diameter.  The flange is
>> 6.250" in diameter and .3875 thick, with 6 holes for the securing studs
>> to go through.  The holes are .500" and it has two 1/2 x13 threaded holes
>> for jack bolts and weighs 22.5 lbs.
>> I have found one for $375 plus about 10% tax, I thought this was a little
>> much as I am cheap.  Does anyone on the list have one in their bone pile
>> or know where I could find one at a better price. I was told shipping on
>> something like this should be $35 to $40.
>> Thanks.
>>
>> Ron Haskell
>> rdhaskell at juno.com
>> Riverside, California USA
>> https://plus.google.com/104862591013550196821/posts
>>
>>
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at