[AT] you've got to be kidding me!

[charlie hill]

John,  If you haven't already found this it might help.

http://www.carbkitsource.com/carbs/numbers/Marvel-Schebler/index.html

good luck.  I've been down the same road but got luckier than it appears you
are.

Is it possible that you could drill out the throttle shaft holes in the 
upper body
and press fit some bronze bushings in the bore and then fashion something
akin to a speedy sleeve over the worn area of your throttle shaft?  Maybe 
something
like some thin wall tubing or possibly braze the shaft and turn it back 
down?

Charlie

-----Original Message----- 
From: jtchall at nc.rr.com
Sent: Sunday, February 22, 2015 1:31 PM
To: Antique tractor email discussion group
Subject: Re: [AT] you've got to be kidding me!

Nope, I searched the planet over guys,basic kits with no throttle shaft or
venturi are common. IH is the only one that had it listed with a throttle
shaft--way too expensive as is about anything they sell. There are a
gazillion TSX carbs out there, all configured differently. The one I had to
have is for a 959, if all I needed was a gasket, needle and seat, not a
problem. Bates is the only place I found with one in stock and its not on
his website. There were 2 different Marvel carbs for this machine, and the
kits don't interchange. The listing they have online is for the wrong carb.
He sent me the 2nd kit  after he realized there listing only was for one
carb and does not fit both. I even ran into a little trouble sourcing a
venturi, but there are a couple of folks that carry those.  You really need
to go by the tag on the carb. I've even got the old Marvel and Zenith books,
they weren't much help other than determining this one is an oddball.


Life gets real fun when there is no tag on the carb. It took a couple tries
and some photos to figure out what carb was on my dumptruck. As my luck
would have it, the carb shop that supplied the parts said it was the least
used for that application.

John



_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at