[Farmall] Farmall H Head Installation

[Dan Malinowski]

Look for ARP fasteners they manufacture hardened and ground washers for use on head bolts and other critical fasteners. They are much less than $10ea

http://arp-bolts.com/kits/Bulk.php?PL=68&M=*&W=*&D=*&P=*&WS=*&B=1

Dan

-----Original Message-----
From: farmall-bounces at lists.antique-tractor.com [mailto:farmall-bounces at lists.antique-tractor.com] On Behalf Of szabelsk at gdls.com
Sent: Tuesday, April 21, 2015 11:18 AM
To: Farmall/IHC mailing list
Subject: Re: [Farmall] Farmall H Head Installation

Just found a reference that says the shorter studs were replaced with the longer ones in all positions, so maybe that's what I have. Also found that the washer are $10 a piece, I have two, so all I need is another $140 to finish the job.


Carl Szabelski


The Borg Are Wrong, Resistance Is Not Futile ..... It's Voltage / Current _______________________________________________
Farmall mailing list
http://www.antique-tractor.com/mailman/listinfo/farmall


________________________________
This electronic message including any attachments ("Message") may contain information that is privileged, confidential and/or exempt from disclosure under trade secret and other applicable law. If you are not the intended recipient, notify the sender immediately, permanently delete all copies of this Message, and be aware that examination, use, dissemination, duplication or disclosure of this Message is strictly prohibited.