[Farmall] cub question

Darrell Ratliff dbigdog at columbus.rr.com
Sat Mar 29 17:41:59 PDT 2014


The pump can be easily removed by removing the steel lines from the pump and then removing the remaining two bolts.  The pump will pull right out and the repair can be made.  You are correct in your assumption that the pump seals are bad.
    The kit is available from Case IH.


From: rjsmithent at juno.com 
Sent: Saturday, March 29, 2014 8:21 PM
To: farmall at lists.antique-tractor.com 
Subject: [Farmall] cub question



gentlemen --

I've been a long time lurker  on this list 
and now have a question .
I have a farmall cub and I'm finding that several times during the mowing season 
the hydraulic tank is low on oil and the crank case is over full on oil .
this leads me to believe that the hydraulic pump front seal is bad and pushing oil into the timing cover . 

my question 
can I pull the pump out the back  with out having to pull the timing cover /gears etc ? 

any input would be greatly appreciated 

RJ  
____________________________________________________________
The #1 Worst Carb Ever?
Click to Learn #1 Carb that Kills Your Blood Sugar (Don't Eat This!)
http://thirdpartyoffers.juno.com/TGL3131/533763b96faed63b96641st01vuc

_______________________________________________
Farmall mailing list
http://www.antique-tractor.com/mailman/listinfo/farmall



More information about the AT mailing list